As a relatively non-gifted DIY I'm stuck getting my Tannoy drivers reconnected correctly after removing both the drivers and updating the damping inside the DMT cabinet (should have taken more pictures). I attached a photo for reference. I don't know which terminals on the drivers are pos (+) and neg (-). I think I have the actual wires traced correctly: (black= LF-), (white= LF+), (yellow= HF+) and (green= HF-). The driver is the 3833GG and the crossovers are stock. Also- are there any recommended simple testing technique's/devices to confirm they are correct polarity wise. Thanks for any help.
Tim
Tim
Attachments
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.