SQ-50 drawings

[olyckholm]

Does anyone know where to find the drawings for the SQ-50H loudspeakers? They used to be here:
sq50ritning_full
but are not there anymore.

 

[charlie2]

This any Good??


sq50h e

 

[olyckholm]

Well there are warnings against using them so I think there is something wrong. If I remember correctly, the bass port had no "length" more than the thickness of the material itself. This seems odd, somehow But thanks anyhow!

 

[olyckholm]

It seems the drawings on the site are fake, you get the real drawing with the kit. They communicate well by email, and I have this explanation: The drawing that was on the page before, without any inside part for the bass port inside resulted in a speaker with -3 dB at about 42 Hz, but the new one is -3 dB at 32 Hz and -10 dB at 25 Hz, but now the only way to get the drawing is to buy the kit. It´s OK, it is not very expensive anyhow.
So, if anyone reads this, don´t use the drawings on their site, they are fake!

 

[GM]

So's the write-up.......

GM