|
|||||||
| Home | Forums | Rules | Articles | Store | Gallery | Blogs | Register | Donations | FAQ | Calendar | Search | Today's Posts | Mark Forums Read | Search |
| Multi-Way Conventional loudspeakers with crossovers |
  |
|
|
|
Please consider donating to help us continue to serve you.
Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving |
 |
|
|
Thread Tools | Search this Thread |
15th March 2004, 08:41 PM
|
#1 |
|
diyAudio Member
Join Date: Sep 2002
Location: Austria
|
XO point question....
Hi!
one quick question: Where would you set the XO-point for these drivers: Midbass is the TB W4-992S in a Buschhorn MK2 (No-one needs a subwoofer with that, but it has a very nasty breakup at 2-3kHz, maybe because of the big dustcap????) Tweeter is the Vifa XT25.... I plan an active XO but Iīm not sure after which specīs I should make it... My first thought was a Bessel 2kHz, but is that to low for the XT25? Ampīs are 2xLM3886 and 2xTDA7296 Any suggestions are verrry welcome...
__________________
regards / servus |
|
|
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Wire Wrap connections for point to point | mashaffer | Tubes / Valves | 10 | 7th July 2007 01:11 PM |
| Benifits of point to point wiring for digital circuit? | MGH | Digital Source | 15 | 14th September 2006 10:17 PM |
| DC offset stability and operating point question. | nobody special | Solid State | 2 | 21st September 2004 02:04 PM |
| really dumb question about SE 6bq5 operating point (triode) | zobsky | Tubes / Valves | 5 | 10th April 2004 12:07 PM |
| Anyone use magnet wire for point to point wiring projects? | Hybrid fourdoor | Parts | 10 | 2nd February 2004 08:11 AM |
| New To Site? | Need Help? |
| Page generated in 0.04777 seconds (76.31% PHP - 23.69% MySQL) with 10 queries |
