Hi All,
First of, thank you for all your help in my previous post. Eventually I sold the speakers after realising I'm not that technical after all. This post is in relation to a pair of Qln speakers which are my backups but like them a lot.
I'm having an intermittent fault with one of the drivers. At times in order for it to work, I need to gently push in a cone on the top half. Once it starts it works fine.
Im looking to find a replacement driver. The markings are:
8 Ohm 4155
ZZ 2771
49101 40834/03
LPT 173/25/90 FG
Internet search yields no results. I believe they were made by Vifa. If you'd be so inclined to help, please. I understand that it's likely I'm going to need a suitable replacement but don't know how to go about finding one. Am I also right thinking that they should be changed in pairs?
Thank you in advance!
First of, thank you for all your help in my previous post. Eventually I sold the speakers after realising I'm not that technical after all. This post is in relation to a pair of Qln speakers which are my backups but like them a lot.
I'm having an intermittent fault with one of the drivers. At times in order for it to work, I need to gently push in a cone on the top half. Once it starts it works fine.
Im looking to find a replacement driver. The markings are:
8 Ohm 4155
ZZ 2771
49101 40834/03
LPT 173/25/90 FG
Internet search yields no results. I believe they were made by Vifa. If you'd be so inclined to help, please. I understand that it's likely I'm going to need a suitable replacement but don't know how to go about finding one. Am I also right thinking that they should be changed in pairs?
Thank you in advance!
Ok, one minute. Thanks
An externally hosted image should be here but it was not working when we last tested it.
An externally hosted image should be here but it was not working when we last tested it.
An externally hosted image should be here but it was not working when we last tested it.
Last edited:
Yes, 6 1/2", Described as this on Qln website
Woofer/Mid: 6 1/2″ coated lightweight fibrecone with high flux magnet
Ok, I found specs for C17 but unsure that it would be like for like replacement. Please could anyone confirm?
http://www.translator-info.nl/images/C17WG-69-08.pdf
Woofer/Mid: 6 1/2″ coated lightweight fibrecone with high flux magnet
Ok, I found specs for C17 but unsure that it would be like for like replacement. Please could anyone confirm?
http://www.translator-info.nl/images/C17WG-69-08.pdf
Last edited:
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.