Go Back   Home > Forums > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Multi-Way Conventional loudspeakers with crossovers

Choosing a sub driver based on T/S...
Choosing a sub driver based on T/S...
Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Thread Tools Search this Thread
Old 20th February 2004, 03:13 AM   #1
manxam is offline manxam  Canada
diyAudio Member
Join Date: Dec 2003
Location: Ontario
Default Choosing a sub driver based on T/S...

I'm looking to build a set of stereo subs for use in my HT setup but, due to lack of funds and the cost of shipping/duty to canada, am likely unable to buy anything from partsexpress or madisound. I've scoured solen but find nothing 'affordable'.

I had considered the Tang Band 8" but would prefer a 10 or 12" driver so... my question is this:

If i were to purchase car audio subwoofers, what T/S specs should I look for in order to make a good selection?

I can model them out in WinISD or unibox but really have no idea what I should be looking for

These units will be ported and in approximately 1 cu ft (External dimension (.75" MDF)).

Any help/suggestions would be greatly appreciated.

Thanks alot!
  Reply With Quote
Old 20th February 2004, 08:06 AM   #2
mikee12345 is offline mikee12345  New Zealand
diyAudio Member
mikee12345's Avatar
Join Date: Nov 2002
Location: NZ
ideal response is flat to DC,taking room gain into account
so probably a sealed box thats -3db at 30hz will be okay.

i have a ported box ,tuned to 33hz ,jbl15",the lows dont seem bloated with the sharp roll off

what T/S specs should I look for in order to make a good selection?
Fs=play notes below this and expect more distortion.How much depends on quality and cost

Qts= damping
lower numbers mean ported
higher numbers mean sealed
if its Qts=0.7+ then its only dipole/iB usage really

Xmax=you need enough of it to achieve non distorted output,which will depend on box alignment and type.

Im not a fan of 1 cube ported boxes as the ports are usuialy too long or highly compromised for normal low tunings and high power usage-but you can customise it to the situation and work it out.

www.jlaudio.com 'tutorials'

use winisd pro its fast and easy...read the helpfile in it too.
  Reply With Quote
Old 21st February 2004, 11:16 AM   #3
sreten is offline sreten  United Kingdom
Join Date: Nov 2003
Location: Brighton UK
Your critical parameter is efficiency and the power of the amplifier
such that output is in the right ballpark for your main speakers.

Allied to this the driver must have enough excursion
capability to meet these volume requirements.

Simply put there is a trade-off between volume capability
and the real bass extension you can achieve, lower
efficiency drivers will have more bass.

You are talking about a 0.7 cuft enclosures, or 18 litres internally.

So a Sealed 10" tops, Ported 8" tops, IMO.

  Reply With Quote


Choosing a sub driver based on T/S...Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Need help choosing a driver and a horn design. italynstylion Full Range 27 10th February 2009 01:28 AM
choosing specs for driver that will be used for OB c3conv Multi-Way 3 21st November 2008 08:28 AM
Need help with choosing speaker driver for bookshelf project sumacSK Multi-Way 1 11th February 2007 05:54 PM
Help choosing midrange driver Kittle Multi-Way 17 14th October 2004 08:21 PM
555 based Transformer Driver schematics needed PhaseShift Parts 6 11th July 2002 06:51 PM

New To Site? Need Help?

All times are GMT. The time now is 10:27 AM.

Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 16.67%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Copyright ©1999-2017 diyAudio