Crossover help needed!

Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
Jump to Latest
S

shajan

Member
Joined 2004
Hi guys, newbie here.

I would like to build a MTMW (?) three way system with the drivers that I already have.

The drivers are Axon 6S3, T-1S and a Kicker Impulse 10" car sub. The Axon drivers are from the German Kit I built a couple of years ago.

Please help me with a suitable crossover.

Thanks,

Shajan
 
K

kelticwizard

diyAudio Moderator Emeritus
Joined 2001
shajan said:

I would like to build a MTMW (?) three way system with the drivers that I already have.

The drivers are Axon 6S3, T-1S and a Kicker Impulse 10" car sub. The Axon drivers are from the German Kit I built a couple of years ago.


Shajan
Click to expand...

The German Kit you built-was that an MTM kit?

If so, I would just use the crossover from the kit for the MTM part. Be sure you keep the spacing between the Mids and the Tweeter exactly the same as it was on the old speaker.
 
Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
Top Bottom