Dayton III

bbksv · 11th February 2004, 07:15 PM

I am getting ready to build to crossovers for the dayton and was kind of confused. Is the modified crossover for tweeters after July 2001 or from july 2001 and 2002. In other words....did dayton switch back to the original or not? I looked on speakerbuilder.net and it said between those dates...but I also looked on partsexpress and they just said after july 2001. I need to figure it out before I throw the wrong components in the crossover...because I really only want to do this once.

Bill Fitzpatrick · 11th February 2004, 07:31 PM

If all else fails, contact Parts Express.

leadbelly · 11th February 2004, 07:43 PM

1) The discussion forum at speakerbuilder.net is the best place to post this question.

2) This is what Wayne J. says:

"Shown below are both the original crossover for this project and a revised version of the crossover (bottom) with modified component values to account for changes in the Dayton tweeter (relevant to units purchased between July, 2001 and May, 2002.)"

So yes, the original crossover is best for post-May 2002 units.

bbksv · 11th February 2004, 09:16 PM

Well...thanks for the advice...I just went with the orginal design....all done...

11th February 2004, 07:15 PM	#1
bbksv diyAudio Member Join Date: Dec 2003 Location: Antioch, Il	Dayton III I am getting ready to build to crossovers for the dayton and was kind of confused. Is the modified crossover for tweeters after July 2001 or from july 2001 and 2002. In other words....did dayton switch back to the original or not? I looked on speakerbuilder.net and it said between those dates...but I also looked on partsexpress and they just said after july 2001. I need to figure it out before I throw the wrong components in the crossover...because I really only want to do this once.

11th February 2004, 07:43 PM	#3
leadbelly diyAudio Member Join Date: Dec 2002 Location: Calgary, Alberta	1) The discussion forum at speakerbuilder.net is the best place to post this question. 2) This is what Wayne J. says: "Shown below are both the original crossover for this project and a revised version of the crossover (bottom) with modified component values to account for changes in the Dayton tweeter (relevant to units purchased between July, 2001 and May, 2002.)" So yes, the original crossover is best for post-May 2002 units. __________________ Aerodynamics are for people who can't build engines. Enzo Ferrari

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Peerless XXLS vs. Dayton Reference vs. Dayton Titanic MKIII ?	wigginjs	Multi-Way	6	3rd March 2008 08:56 PM
Vifa/Dayton/Dayton... First speaker for me, finally!	alexcd	Multi-Way	6	29th November 2006 10:54 PM
Dayton DA aluminum cone woofer + Dayton DC28f tweeter	springy101	Multi-Way	7	15th March 2006 05:22 PM
Dayton 6" reference and dayton silk dome tweeter combo project...input?	nerd of nerds	Multi-Way	4	2nd December 2004 05:36 PM
Dayton 5.25" AL vs. Dayton 5.25 paper for Lo-Mid opinions?	netgeek	Multi-Way	6	14th May 2004 01:14 PM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

11th February 2004, 07:31 PM	#2
Bill Fitzpatrick diyAudio Member Join Date: Jun 2001 Location: Eugene, OR	If all else fails, contact Parts Express.

11th February 2004, 09:16 PM	#4
bbksv diyAudio Member Join Date: Dec 2003 Location: Antioch, Il	Well...thanks for the advice...I just went with the orginal design....all done...

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)