Go Back   Home > Forums > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Multi-Way Conventional loudspeakers with crossovers

Best for midrange x-over: Jantzen Wax Coils vs. Solen Hepta-litz?
Best for midrange x-over: Jantzen Wax Coils vs. Solen Hepta-litz?
Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Thread Tools Search this Thread
Old 29th August 2015, 11:48 PM   #1
Winston Smith is offline Winston Smith  New Zealand
diyAudio Member
Join Date: Sep 2013
Location: On a South Pacific island....
Default Best for midrange x-over: Jantzen Wax Coils vs. Solen Hepta-litz?


Has anyone directly compared the Jantzen Wax Coil inductors versus Solen Hepta-Litz inductors in a midrange crossover, and if so, what did you hear and what did you prefer/use, ultimately?

A quick search revealed no threads here in DIYAudio archives that answer this question directly, although a few hinted at it, but no one ever chimed in with any direct comparisons or knowledge.

I have had problems with a slightly rolled-off/closed-in and slightly aggressive upper midrange/lower treble ever since I rebuilt my Cabasse Baltic II speaker crossovers using 12 and 14 gauge Erse inductors four years ago. (Got the inductors from Michael Percy at a great price, though.) Never thought it was the Erse inductors being the problem, but.........

Ric Schultz at tweakaudio.com HIGHLY recommends the 16 and 12 gauge Jantzen Wax Coil inductors for tweeter/midrange x-overs as being sweet and musical, yet supremely extended, open and airy, and strongly recommends AGAINST Erse foils in tweeter/midrange applications as being harsh, forward, and closed-in/rolled off sounding (which is EXACTLY what happened to my sound after I replaced the stock iron core inductors with Erses, even with proper impedance matching using a set of CAST Duelund resistors for matching DCR.)

But I have read others who insist that the Solen Hepta-Litz is the most musical, most satisfying inductor to be used for x-over mods, especially in view of their lower price.

I have already replaced the Erse inductors in my tweeter x-over with Jantzen Wax Coils (only one per channel was needed, so I decided to splurge), and that was a wipe-out: the Jantzens were MUCH more extended, open and airy than the Erses, AND a little lower treble edge was nicely eliminated by the Jantzen WCs as well. A very worthwhile upgrade, no doubt. And not too expensive. But then I read about others claiming the Solen Hepta-Litz was even more natural sounding than the Jantzens, and at MUCH lower prices.

Cost comparison? To do my midrange x-overs in Jantzen Wax Coils it costs me US$180 for the six inductors values I need (3 per channel) from HiFi Collective, versus US$69 for those same six inductors using Solen Hepta-Litz from Parts Connexion. BIG difference there, for sure (and BTW, the DCR of the Solens is pretty close to the original iron cores, so that is also nice. The Jantzen is not so close a match, and may require a resistor for DCR optimization.)

So, which inductor will it be? Jantzen or Solen?

(Of course, I am always open to any other suggestions regarding the best inductors for midrange x-overs as well...... ) ;-)

Many, many thanks in advance for any and all help, advice, and guidance offered.


Winston Smith
  Reply With Quote
Old 30th August 2015, 02:00 AM   #2
Bare is offline Bare  Canada
diyAudio Member
Join Date: Dec 2001
Location: vancouver
Hmmmm... Frankly my friend.. that reads like a sermon from Someone who has an "agenda".
I first bought and used Foil Coils in early 90's and yes they do work.. in some cases.
But are they Better than a Decent E coil OR Air coil of the same/similar resistance?? No :-)
I've Replaced a Half Pound Foil Coil (one of My earlier upgrades ) with an OEM Tiny high resistance Laminated core coil... for Marked Audible improvements. Bit of an Epiphany there.
Just because Sales types claim something.. it Does Not mean that you have to accept it as Gospel (or even assume it's close to accurate)
Don't be forgetting that Foils ultimately Corrode... Wax goop be damned .
But No-One mentions that! in their Brochure babbles.. Do they?

Last edited by Bare; 30th August 2015 at 02:02 AM.
  Reply With Quote
Old 30th August 2015, 07:20 AM   #3
Lojzek is offline Lojzek  Croatia
diyAudio Member
Lojzek's Avatar
Join Date: Feb 2012
Location: Croatia
What a load of nonsense recommending one brand over the other.
Propaganda works only when people refuse to use their brains.
So, I advise you get yourself a measurement equipment and do
some real work on solving the issue if there is one at all.
  Reply With Quote


Best for midrange x-over: Jantzen Wax Coils vs. Solen Hepta-litz?Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
FS Jantzen Wax coil 1,0mH 12 AWG sippo Swap Meet 0 22nd January 2014 05:08 PM
where buy jantzen wax coil ? diypass Multi-Way 10 10th October 2013 11:01 AM
Jantzen Vs Mundorf Vs Solen Vs others bowdown Multi-Way 55 26th March 2013 07:57 AM
Looking for Large Solen/SCR/Axon/Jantzen Polypropylene Capacitors dtm1962 Swap Meet 4 15th December 2010 10:27 PM
AlphaCore Copper Foil or Solen Hepta-litz ??? bbaker6212 Multi-Way 22 23rd September 2007 12:04 AM

New To Site? Need Help?

All times are GMT. The time now is 08:44 PM.

Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 15.79%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Copyright ©1999-2017 diyAudio