diyAudio (
-   Multi-Way (
-   -   baffle step help. (

AudioGeek 9th February 2004 04:48 PM

baffle step help.
I have a baffle width of 9 1/4 ".

With a 8ohm sealed driver (6V013L)... what should I use as my BSC circuit?

8 ohm paralleled with what inductor... and what DCR of inductor?


roddyama 9th February 2004 05:16 PM

Check the WIKI on Baffle Step here. It also gives a link for BSC

Timn8ter 9th February 2004 05:20 PM

Or here at True Audio.

Svante 10th February 2004 11:02 AM

You could also try my little hack that calculates the baffle step in more detail. It can model any (flat) baffle shape and gives you the effect the baffle adds on the frequency response.

The +6dB step that is commonly used is an approximation. My program is a better approximation unless your baffle is spherical.:D

All times are GMT. The time now is 06:03 PM.

vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Copyright 1999-2017 diyAudio

Content Relevant URLs by vBSEO 3.3.2