Go Back   Home > Forums > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Multi-Way Conventional loudspeakers with crossovers

Open Baffle Line Array - using cheap drivers
Open Baffle Line Array - using cheap drivers
Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Thread Tools Search this Thread
Old 26th January 2004, 02:34 AM   #1
giambi77 is offline giambi77  United States
diyAudio Member
Join Date: Dec 2003
Location: Northern CA
Exclamation Open Baffle Line Array - using cheap drivers

I am new to the world of DIY audio, and I am looking to build my first set of speakers. Creating an enclosure of the correct size goes beyond my woodworking skills and knowledge of speakers as of right now, so the idea of an Open Baffle seems very appealing. Also, since I want to use cheap drivers for my first speaker, and I decided a line array would be an interesting way to go.

I recently found these speakers:
Click the image to open in full size.

*Power Handling: 5 watts RMS/10 watts max
*VCdia: 3/4"
*Le: .60 mH
*Znom: 8 ohms
*Re: 7.50 ohms
*Frequency range: 75-15,000 Hz
*Fs: 105 Hz
*SPL: 86 dB 2.83V/1m
*Vas: .08 cu. ft.
*Qms: 5.0
*Qes: .90
*Qts: .76
*Xmax: 1 mm
*Driver Dimensions: A: 4", B: 3-11/16", C: 2-1/4".

Since they are 8 ohm, if I wired 4 of them together, I could get the total resistance to be 8ohms also, right (series, then parallel)?I am not expecting amazing sound out of these speakers, as this is more of a learning experience, but would they sound decent?

Again, I know very little about speakers, so would these work well with an open baffle? What is the best method to cut circles in the wood? I have heard people talk about using a router....but i'm not sure how you make holes with it. If anyone has links to basic woodworking sites related to making speaker enclosures, it would be much appreciated!

I may be totally on the wrong track, so feel free to make any comments/suggestions! Thanks.
  Reply With Quote
Old 26th January 2004, 03:50 AM   #2
ralph-bway is offline ralph-bway  United States
diyAudio Member
Join Date: Sep 2002
Location: Long Island, NY
Default cheap array


check out this thread.


Tom used a very similar version of a cheap Parts Express 4" full range. Look at the entire thread. He paid a lot of attention to detail and I picked up a wealth of ideas and improvements to what I was considering.

I considered doing a cheap line array with the same speakers you're looking at. I emailed Tom to ask how they sounded a few days ago, but haven't gotten an answer yet. In the end I decided to go with five Audax 4.5" mid/woofers (269-434) and 24 of the Onkyo tweeters (269-702) in an array.

Also for cutting small holes a plain hole cutter with an electric drill would work fine. Go to the library and look at the books on basic cabinetry and carpentry.

Last and far, far from least try to get planet10's attention, he really knows his stuff.

Probably a silly question, but ........
  Reply With Quote
Old 26th January 2004, 04:38 AM   #3
Cal Weldon is offline Cal Weldon  Canada
diyAudio Moderator
Cal Weldon's Avatar
Join Date: Jan 2004
Location: Near Vancouver
Open Baffle Line Array - using cheap drivers
My first line array was about 25 years ago before I knew the term. I was using a really great little 5" driver from Radio Shack, yes RS. I never looked into who made it but it had a cast aluminum basket and an aluminum voice coil cap. For that long ago it was a great driver. I used them as midranges for other projects 'cause they were both heavy duty and a really decent midrange. They had JBL looking white cones and a JBL looking frame. Not to mention the aluminum voice coil cap. Hmmm...
When grandmother died, the inheritance allowed me to put eight of those into each sealed tower [deep and skinny] box. That was really cool. I had an SAE 400wpc power amp and these little things did themselves proud. Loud and proud in fact.

One problem:

My other project at that time was 10" 2 way that used [embarrassed, don't remember the woofer, Oaktron (silly square magnet) maybe?] with Coral dome tweeters and a so-so Xover.

While I like the line array effect, this was a sad comment on "more doesn't mean better" They could handle all I could throw at them, but they didn't sound as good as my 2 way. For just that reason, it was a full range. One unit doesn't cut it. Wanna talk the Bose 9 series?

Take all your bucks and put into a solid two way system. It's your first project. Play on your second one.

Happy cranking,
  Reply With Quote
Old 26th January 2004, 09:03 PM   #4
coolkhoa is offline coolkhoa  United States
diyAudio Member
coolkhoa's Avatar
Join Date: Jan 2004
Location: Houston
Send a message via AIM to coolkhoa Send a message via MSN to coolkhoa Send a message via Yahoo to coolkhoa

Some time ago I have ordered 32 of these buyouts because they're so darn cheap! I haven't gotten to even testing them but plan on making 2 16-driver (you read that right) line arrays. Or I'll be modest and make 8 4-driver lines...
You see, the 16-driver array (when wired appropriately) still maintains the 8-ohm impedance of a single driver. And so does 32, 64, 128...you get the idea.

Just my thoughts.
KTK. Kool To the Kore.
  Reply With Quote
Old 26th January 2004, 09:29 PM   #5
diamdiam is offline diamdiam  United States
diyAudio Member
diamdiam's Avatar
Join Date: Mar 2002
Location: Chicago
Send a message via AIM to diamdiam
I'm not sure if you've seen this post on the partsexpress board, but here's a link to what Rick Craig had to comment on using cheap drivers for a line array


I think a couple weeks ago a lot of people were thinking about using those onkyo's as a line array. After his post, people stopped talking about it.
I trust his opinion, he has a lot of experience building line arrays and has some darn nice designs.
  Reply With Quote


Open Baffle Line Array - using cheap driversHide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Open baffle Line array carpenter Full Range 81 21st July 2010 10:50 PM
Open Baffle Line Array 24kilo Multi-Way 11 24th September 2005 04:10 AM
Open baffle line array ryoshu Multi-Way 15 15th January 2003 11:10 AM

New To Site? Need Help?

All times are GMT. The time now is 09:31 AM.

Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 16.67%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Copyright ©1999-2017 diyAudio