Hello all, new here after years of watching and learning. I have 2 pairs of KLH model 32 speakers, 8" woofers with little paper cone tweeters. All appear the same. I want to re-cap the tweeters and found that one pair has 4.7 uf caps soldered in line, the other has 4.0 uf caps taped to the low-pass filter. Tweeters all measure close to 4 OHMs. The low-pass filters appear the same.
Which cap would give the best performance and still filter what it needs to filter to protect the tweeter?
Which cap would give the best performance and still filter what it needs to filter to protect the tweeter?
Use Dayton Audio caps from Parts Express. Check what this guy did with his 17's:
Renovation of my KLH 17's is complete (long) - AudioKarma.org Home Audio Stereo Discussion Forums
Renovation of my KLH 17's is complete (long) - AudioKarma.org Home Audio Stereo Discussion Forums
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.