Audax TSM needed . urgent!

bytelight · 19th January 2004, 11:49 AM

Has anyone experience regarding following speakers i own?

Audax PR170MO 6,5"
Audax PR300MO 12"

I urgently need the TSM values of the PR 300 MO, especially Vas.

can anyone help !

greets
kai

Pjotr · 19th January 2004, 12:40 PM

http://www.audax-speaker.de/products/prod_pr.htm

Cheers

bytelight · 19th January 2004, 01:22 PM

thX for the fast reply. But the 300MO ist not listed (only 330MO).

answers are still welcome.

ThX
kai

kelticwizard · 19th January 2004, 04:20 PM

Here is the listing.
http://www.hal-pc.org/~bwhitejr/drivers.txt

This is the only driver I have seen under 24" which has a Vas of over a cubic meter, (35 Ft³).

If you like buying older drivers, you might consider saving that list.

bytelight · 20th January 2004, 06:09 AM

you are kissed

in fact ihad the Vas but i had the wrong Qes and wasn't sure about the Rms value.

Thank you VERY, VERY much.

greets
kai, germany

Just for the record :
MANUF ID RE FS VAS QES QMS SD PE XMAX LE DIAM MMS BL SENS QTS ACCEL FRAME CONE SURR RECNO

AUDAX PR300MO 5.7 17 1.0121 .28 3.55 .0521 100 .0044 .42 12 .03291 8.459 94.488 .2595 257 CAST PAPER FOAM 54

19th January 2004, 11:49 AM	#1
bytelight diyAudio Member Join Date: Jun 2003 Location: southstates of germany	Audax TSM needed . urgent! Has anyone experience regarding following speakers i own? Audax PR170MO 6,5" Audax PR300MO 12" I urgently need the TSM values of the PR 300 MO, especially Vas. can anyone help ! greets kai

19th January 2004, 01:22 PM	#3
bytelight diyAudio Member Join Date: Jun 2003 Location: southstates of germany	not listed thX for the fast reply. But the 300MO ist not listed (only 330MO). answers are still welcome. ThX kai

19th January 2004, 04:20 PM	#4
kelticwizard diyAudio Member Join Date: Sep 2001 Location: Connecticut, The Nutmeg State	Here is the listing. http://www.hal-pc.org/~bwhitejr/drivers.txt This is the only driver I have seen under 24" which has a Vas of over a cubic meter, (35 Ft³). If you like buying older drivers, you might consider saving that list. __________________ "A friend will help you move. A really good friend will help you move a body." -Anonymous

20th January 2004, 06:09 AM	#5
bytelight diyAudio Member Join Date: Jun 2003 Location: southstates of germany	@kelticwizard you are kissed in fact ihad the Vas but i had the wrong Qes and wasn't sure about the Rms value. Thank you VERY, VERY much. greets kai, germany Just for the record : MANUF ID RE FS VAS QES QMS SD PE XMAX LE DIAM MMS BL SENS QTS ACCEL FRAME CONE SURR RECNO AUDAX PR300MO 5.7 17 1.0121 .28 3.55 .0521 100 .0044 .42 12 .03291 8.459 94.488 .2595 257 CAST PAPER FOAM 54

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

19th January 2004, 12:40 PM	#2
Pjotr diyAudio Member Join Date: Nov 2002 Location: Netherlands	http://www.audax-speaker.de/products/prod_pr.htm Cheers

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Urgent OT HELP needed ASAP please	Valvomaniac	Tubes / Valves	11	3rd April 2007 12:11 PM
WTB very urgent/Audax TM025M1	peterpan	Swap Meet	2	26th April 2004 07:53 AM
Urgent help needed	rossco	Multi-Way	6	19th March 2004 06:53 AM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read