Someone was asking in another thread if I would show these a little more. They started life as a set of Community speakers from a pub and I added the blowout Sammi Coax's from Parts Express. Here they are on Vancouver Island this last weekend for the annual diyFest at planet10's. I use 4 amps in a tri-amp system with one Tascam for each on the mids and one for the two tweeters. The Hafler 500 runs the woofers. XO's are the Behringer CX2310.
Attachments
It was a straightforward build, no rebating the drivers but I threw in a stick brace or five, a divider panel for the coax and a bunch of holes behind it. Quick build as it was butt joints with cleats so there was no waiting, just full steam ahead. For less than $500 it's hard to beat. They sounded quite good and on top of that, Dave now has a clean driveway. 
Attachments
Yes, it's always interesting when you use a mid the same size as the woofer. The 48dB xo (IIRC) seemed to work best at 120Hz and 3kHz.
Thanks to Dave proteges, Daniel and Brandon. They had some 1000 or so LED lights strung up including that single multi-watt unit under the canopy. Sure made life easy for the fat guy.Love the lighting in the first shot.
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.