diyAudio

diyAudio (http://www.diyaudio.com/forums/index.php)
-   Multi-Way (http://www.diyaudio.com/forums/multi-way/)
-   -   Cabinet question ? (http://www.diyaudio.com/forums/multi-way/25422-cabinet-question.html)

jim 5th January 2004 08:27 PM

Cabinet question ?
 
Hi,

I'm building a pair of speakers but I don't know if I should first make the holes for the drivers and put veneer on afterwards or is it best to put on the veneer first and then make the driver cut-outs ?

Thanks in advance,
Jim

jwatts 5th January 2004 11:59 PM

Holes
 
What are you going to use to cut the holes with?

jim 7th January 2004 12:28 PM

Hi,

I want to cut the holes with a router.

Jim

RobPhill33 7th January 2004 01:50 PM

I think it would be better if you cut the holes first. That way if you mess anything up you don't have to throw away the expensive veneer. Cut the holes for the drivers but don't rabbett the edges yet ( I assume you are flush mounting the drivers). Then put the veneer on and rabbett the edge of the holes.


All times are GMT. The time now is 12:25 PM.


Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 18.75%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Copyright ©1999-2018 diyAudio

Wiki