I found this posted on a danish website... http://userportal.iha.dk/~20033778/forord.htm
I thought it looked very nice and wanted to share even though it is in danish...
Kongen
I thought it looked very nice and wanted to share even though it is in danish...
Kongen
Thanks for the link, Kongen.
This link is also imformative and has been posted here before:
http://www.hifi4all.dk/forum/forum_posts.asp?TID=3729&PN=1
Your link seems to show a simpler technique for laminating the mdf layers than my link.
Can you provide a translation? Or anyone else?
Mos
This link is also imformative and has been posted here before:
http://www.hifi4all.dk/forum/forum_posts.asp?TID=3729&PN=1
Your link seems to show a simpler technique for laminating the mdf layers than my link.
Can you provide a translation? Or anyone else?
Mos
Thank You , Thank You. They are completely disassembled at the moment.Typical DIY syndrome 
Actually the photos make them look better finished than they are. To fix this I just got two sheets of veneer at www.tapeease.com. The just roll it up in a box 4'x10"x10" and ship it. Got the recommendation about them online here. I got the wood backed 2 ply stuff which is about $75 a 4'x8' sheet for the African ribbon Mahagony, but they claim it's pretty easy to use. Have also made a bigger top baffle for lower midrange, but it doesn't look as cool 
:
Actually the photos make them look better finished than they are. To fix this I just got two sheets of veneer at www.tapeease.com. The just roll it up in a box 4'x10"x10" and ship it. Got the recommendation about them online here. I got the wood backed 2 ply stuff which is about $75 a 4'x8' sheet for the African ribbon Mahagony, but they claim it's pretty easy to use. Have also made a bigger top baffle for lower midrange, but it doesn't look as cool :- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.