glue for surround to basket separation? JMLabs

[flacoguapo]

Ive got a pair of JMLabs 906 electra's and the surrounds have partially separated from the baskets.
I want to glue them back in place and am looking for advice on method/process and type of recommended glue/epoxy for these focal drivers.
I have some experience in component building so I would consider myself moderately competent.

Many Thanks for any and all help.
Stefan

 

[jr]

I don't know about JMLABS/FOCAL, but JBL use "Moyen RS-3087" to glue the surround to the basket.

 

[whgeiger]

from Loctite

Ive got a pair of JMLabs 906 electra's and the surrounds have partially separated from the baskets.
I want to glue them back in place and am looking for advice on method/process and type of recommended glue/epoxy for these focal drivers.
I have some experience in component building so I would consider myself moderately competent.

Many Thanks for any and all help.
Stefan

Here is a guide to help you make a selection.

Regards,

WHG

 

[tvrgeek]

"Black Death" aka 3M black trim adhesive.

 

[Bare]

Go ahead and Open the wallet to a decent surround re-foam.
If so poor that that price is out of reach?
Elmers' rubber cement is as good as any other glue... likely far better actually.

 

[rabbitz]

Speakerbits sell a water based adhesive.
Adhesive / coating / tools
A pdf showing it's use:
http://www.speakerbits.com/index.php?option=com_phocadownload&view=category&download=1:refoam-instructions&id=1:library&Itemid=11