|
|||||||
| Home | Forums | Rules | Articles | Store | Gallery | Blogs | Register | Donations | FAQ | Calendar | Search | Today's Posts | Mark Forums Read | Search |
| Multi-Way Conventional loudspeakers with crossovers |
  |
|
|
|
Please consider donating to help us continue to serve you.
Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving |
 |
|
|
Thread Tools | Search this Thread |
12th December 2003, 03:32 AM
|
#1 |
|
diyAudio Member
Join Date: Dec 2003
Location: Houston, TX
|
Can somebody confirm this calculation?
I'm trying to determine the Square Port length
VB=50 Lt FB=30Hz Height= 1 inch Width= 8 inches Port length = 11.110 inches or 13.5672 inches which is correct ??? Thanks |
|
|
12th December 2003, 06:04 AM
|
#2 |
|
diyAudio Member
Join Date: Sep 2001
Location: Connecticut, The Nutmeg State
|
According to WinISD, it is 10.10 inches.
However, also according to WinISD, the length of 13 inches will only lower tuning 3 Hz-down to 27 Hz. Which won't change much. So relax-you are in the ballpark.
__________________
"A friend will help you move. A really good friend will help you move a body." -Anonymous |
|
|
|
| Thread Tools | Search this Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| I Think I Understand Baffle Step...Plz Confirm | 69stingray | Multi-Way | 13 | 6th December 2006 05:33 AM |
| Can someone confirm this xover layout? | xyrium | Multi-Way | 4 | 24th October 2005 03:43 AM |
| Please confirm my transformer math. | leadbelly | Tubes / Valves | 7 | 12th March 2005 12:52 AM |
| help needed to confirm part numbers | chipco3434 | Chip Amps | 6 | 15th August 2004 12:05 PM |
| Fred D... can you confirm this... | MWP | Digital Source | 3 | 24th May 2003 06:31 AM |
| New To Site? | Need Help? |
