Go Back   Home > Forums > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Multi-Way Conventional loudspeakers with crossovers

Please Help Me Understand This...
Please Help Me Understand This...
Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 9th December 2003, 06:49 PM   #1
RobAche is offline RobAche  United States
diyAudio Member
 
Join Date: Dec 2003
Location: tulsa, ok
Question Please Help Me Understand This...

As you may know, I know very little - audio wise, and have a fairly crummy system to boot.

My RCA 5.1 system has no volume adjustment for the individual speakers BUT it does have individual decibel adjustment from -9 to +9.

Now, my thinking is: -9 is very quiet and +9 is the loudest.

Is this so?

And if so, why wouldn't it be 0 to +9 ?

Anyway, I've currently been keeping all but my sub at +7 and the sub at +9, thinking that gives my bass a boost over the treble.

After you finish laughing, please explain what this is and how it works.

Thanks Again!!

Rob
  Reply With Quote
Old 9th December 2003, 07:17 PM   #2
wigginjs is offline wigginjs  United States
diyAudio Member
 
wigginjs's Avatar
 
Join Date: Dec 2003
Location: Columbia, SC
These adjustments are essentially volume controls for the individual speakers. The numbers represent the dB increase the amplifier will apply to the particular channel. 0dB being the reference volume for the source material, negative numbers being quieter the reference, positive numbers being louder than reference. All things being equal I would leave all the adjustments are zero and just use the main volume knob to adjust volume. Increasing the adjustment for the individual speakers will increase the volume of the material sent to that speaker, RELATIVE to the other speakers. If your speakers that have different sensitivities increasing the adjustment for a particular speaker will not nessicarily make it louder in comparison to the other speakers. I hope this helps.
  Reply With Quote
Old 9th December 2003, 07:19 PM   #3
wigginjs is offline wigginjs  United States
diyAudio Member
 
wigginjs's Avatar
 
Join Date: Dec 2003
Location: Columbia, SC
Also, this question doesn't really have anything to do with DIY loudspeakers and I think questions of this nature would be more at home in another forum (such as the audio section of www.AVSforum.com).
  Reply With Quote
Old 9th December 2003, 07:44 PM   #4
RobAche is offline RobAche  United States
diyAudio Member
 
Join Date: Dec 2003
Location: tulsa, ok
Thank you good sir.
  Reply With Quote

Reply


Please Help Me Understand This...Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
I Don't Understand. Patrick Bateman Multi-Way 90 2nd January 2018 02:31 AM
Trying to understand this LPF better Mike-Toronto Multi-Way 2 29th May 2009 11:17 PM
I Can't Understand What They're Saying. Patrick Bateman Multi-Way 6 27th February 2009 07:40 PM
Try to understand have' Tubes / Valves 1 8th July 2006 10:27 AM


New To Site? Need Help?

All times are GMT. The time now is 02:57 PM.


Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 16.67%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Copyright ©1999-2018 diyAudio
Wiki