4-way active PA. Techno system! Build thread - Page 5 - diyAudio
Go Back   Home > Forums > Loudspeakers > Multi-Way

Multi-Way Conventional loudspeakers with crossovers

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 11th May 2013, 06:31 AM   #41
diyAudio Member
 
Join Date: Jan 2011
Turns out the adapter is aluminum, so no welding steel supports to that.

Went back to the original support rods I had planned for it.

Click the image to open in full size.

Click the image to open in full size.

Click the image to open in full size.

Last edited by m R g S r; 11th May 2013 at 06:37 AM.
  Reply With Quote
Old 11th May 2013, 06:34 AM   #42
diyAudio Member
 
Join Date: Jan 2011
Got the midbass complete! Did all the 4c wiring, just have to tackle the 8 conductor wiring now and the signal wiring in the amp rack. Then the power wire and she should be ready to fire up!

Click the image to open in full size.

Click the image to open in full size.

Click the image to open in full size.

Last edited by m R g S r; 11th May 2013 at 06:38 AM.
  Reply With Quote
Old 11th May 2013, 07:38 AM   #43
diyAudio Member
 
Join Date: Dec 2009
Location: California
What's that angle for the compression driver, about 22.5?
  Reply With Quote
Old 11th May 2013, 12:54 PM   #44
diyAudio Member
 
Join Date: Jan 2011
You mean the physical angle the driver is mounted with respect to the 8" drivers?
  Reply With Quote
Old 11th May 2013, 01:19 PM   #45
diyAudio Member
 
Join Date: Dec 2009
Location: California
Yessir
  Reply With Quote
Old 11th May 2013, 05:17 PM   #46
diyAudio Member
 
Join Date: Jan 2011
Crap I forgot to check the angle for you. I forget what it is. I'll check next time I'm there.

Midbass on top of the sub.
Click the image to open in full size.

8c neutrik in from the sub, 4c neutrik out to the top.
Click the image to open in full size.
  Reply With Quote
Old 11th May 2013, 05:20 PM   #47
diyAudio Member
 
Join Date: Jan 2011
This was fun. Not lol. I drilled out all the tabs so I could insert the 13awg wire then soldered them in place.

Click the image to open in full size.

Two 8c neutrik into the sub. Well one in one out.

Click the image to open in full size.
  Reply With Quote
Old 13th May 2013, 07:31 PM   #48
diyAudio Member
 
Join Date: Feb 2004
Looks great!!!!!
  Reply With Quote
Old 14th May 2013, 04:36 AM   #49
diyAudio Member
 
BP1Fanatic's Avatar
 
Join Date: Jan 2009
Location: Columbus, Ohio
+1!
  Reply With Quote
Old 18th May 2013, 06:11 PM   #50
diyAudio Member
 
Overkill Audio's Avatar
 
Join Date: Oct 2006
Default Party on Garth!

Congrats, cool PA and portable too, nice one!
D.
  Reply With Quote

Reply


Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Sphere modular system build thread joe58 Full Range 22 23rd August 2012 10:40 AM
What do I need to build for "Techno" query Moondog55 Multi-Way 48 19th July 2012 11:18 AM
Advice needed to build new 3 way active system Zeverin Multi-Way 35 7th September 2010 11:56 AM
Trying to build a very unusual PA system maestrodave Introductions 2 14th August 2008 04:20 AM


New To Site? Need Help?

All times are GMT. The time now is 05:55 PM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio

Content Relevant URLs by vBSEO 3.3.2