Go Back   Home > Forums > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Multi-Way Conventional loudspeakers with crossovers

CD protection when running active
CD protection when running active
Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Thread Tools Search this Thread
Old 3rd April 2013, 04:20 AM   #1
loudsubz is offline loudsubz  Canada
diyAudio Member
Join Date: Dec 2007
Default CD protection when running active

I have read that a simple cap inline on the driver should suffice for DC protection. When I emailed eminence directly and told them what I was doing they didn't seem to think a cap was even necessary.

Is it overkill or can I easily ruin a CD from a dc spike from the amplifier when running components in an active environment?

If I should run a cap is there a magic value that seems to work well or does it need to be calculated so its not interfering with the crossover points set on the active crossover?
  Reply With Quote
Old 3rd April 2013, 04:34 AM   #2
POOH is offline POOH  United States
diyAudio Member
POOH's Avatar
Join Date: Oct 2010
Location: Ohio
With 4" drivers, 2" exit in home systems I haven't had a problem in 20 some odd years of using them without a protection cap. That's not to say a DC spike won't take one out and some diaphragms are really expensive. Small format drivers I normally will use a high quality 10-30 uf cap in series to protect them because they are normally a lot more fragile. The lower you use the driver the bigger the cap. An octave or more lower than the normal high pass should do the trick. In some case you can use a 2-3 uf cap to eq the driver to use it as a treble only driver in conjunction with an electronic crossover with excellent protection and results
  Reply With Quote


CD protection when running activeHide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Tweeter protection in active setup krassyg Multi-Way 30 9th January 2017 03:12 AM
Generating and running FIR filters for active loudspeakers Dan_E10 Digital Line Level 5 10th September 2008 01:26 AM
Running A Component Set Active Off of A Single Amp... HsOffRoad Car Audio 5 5th March 2008 03:29 AM
Running a 220v cd player on 110v ark Everything Else 7 10th May 2006 04:32 PM
Is it possible - 6922 Active X-over running with ~ +/- 40V ? Will Tubes / Valves 15 18th April 2005 11:22 AM

New To Site? Need Help?

All times are GMT. The time now is 09:15 AM.

Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 15.79%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Copyright ©1999-2017 diyAudio