Imus - 3 way build with ScanSpeak drivers (large)

[Aircirc]

It is not glued, so it will have bracing too..

 

[FE3T]

About the port placement, my JBL XPL200`s have almost the same port placement, so do the 3 XPL140`s i use as front, rear, and center channel.

If this really was a problem, shouldnt the JBL engineers know better than doing this?

 

[Aircirc]

Finishing the upper cabinet:

 

[Aircirc]

More pics:

 

[lduarte1973]

Yes, it's the only speaker reused from the previous build, don't ask why...

if you dont want them send them to me love 3 ways

 

[MJPAudio]

I made something similar last year.

ScanSpeak: 6600, 18W, 26W


Phase:
Red:tweeter
Green:mid
Blue:bass

 

[Aircirc]

I made something similar last year.

ScanSpeak: 6600, 18W, 26W


Phase:
Red:tweeter
Green:mid
Blue:bass

A kind of smaller sisters of mine.Nice amp too...

 

[Aircirc]

Almost ready for paint job.

 

[Aircirc]

Finished the speaker itself,only the crossover part is remaining,could not be happier with the result!!

 

[Aircirc]

Speakers in place,time for final show-off.

 

[Greebster]

Very nice! Balance well with the room decor too

 

[Face]

Beautiful job!

 

[danny_66]

Very very nice !

I see some resemblance with mine

 

[blossom]

Stunning!!!

 

[kbzx35]

Looks gorgeous Aircirc! If you don't mind sharing some of your wood craftsmanship skills, could you describe the method on how you cut the side edge angles on the front of the enclosure? I would really like to incorporate that style into my next project but have seen a lot of examples but no guidance on what tools or steps were used to create such a clean angled cut. Thanks!