System Pictures & Description - Page 169

navin · 29th September 2009, 11:49 AM

Quote:

Originally Posted by 56oval

Here's a mock up of the striplam ply & alloy baffle

Quote:

Originally Posted by 56oval

The drivers
Raven R1
PHL1120 6.5" mid
PHL3020 10" lower mid/upper bass

the upper section is a 3 way? with a 10" woofer. It looks smaller than that.

So will the XO used tubes too?

56oval · 29th September 2009, 04:58 PM

Quote:

Originally Posted by navin

the upper section is a 3 way? with a 10" woofer. It looks smaller than that.

So will the XO used tubes too?

Not at first maybe latter if my mate will give me a hand .

Cheers

maskinisten · 3rd October 2009, 06:09 PM

My center speaker, based on components from a pair of AR1 Hi Res, semiactive with 2 built in 500W RMS Sunfire amps each driving a 15'' bass element.
Frequency response on the original construction +/- 2db @ 18 - 23000Hz.

brianpowers27 · 12th October 2009, 06:21 PM

Bassment prototype area.

2.5 way neo8 dipole crossed 800hz lr2 via behringer dcx2496 to 115l TL. TL hold dual RS225s.

jpbturbo · 16th October 2009, 03:43 AM

Here's my current setup based around my modified Klipsch Heresy 1's.

-Josh

djn04 · 18th October 2009, 08:04 PM

Here are mine. They are Zaph ZRT's in a pair of cabinets I made from stacked baltic birch.

TerryO · 18th October 2009, 08:27 PM

Quote:

Originally Posted by djn04

Here are mine. They are Zaph ZRT's in a pair of cabinets I made from stacked baltic birch.

Very nice! Did you construct each layer from a single piece of BB or did you use mitered strips? I'm afraid that I'm a bit (bit?) of a cheapskate and I would have been tempted to do it in that manner.
How thick are the walls of the cabinet?

Best Regards,
TerryO

djn04 · 18th October 2009, 08:57 PM

from a single piece of birch. It's not the cheapest way but it's incredibly stiff. The top and bottom are 3/4" and the sides are 1 1/4" thick. All the pieces were CNC'ed.

TerryO · 18th October 2009, 09:06 PM

Quote:

Originally Posted by djn04

from a single piece of birch. It's not the cheapest way but it's incredibly stiff. The top and bottom are 3/4" and the sides are 1 1/4" thick. All the pieces were CNC'ed.

Well, you're certainly right about stiffness

Did you use any bracing inside the cabinet? Given the wall thicknesses, it would probably be overkill, but still.........

Best Regards,
TerryO

djn04 · 18th October 2009, 09:10 PM

Here's some pictures of the internals

here's what I started with

3rd October 2009, 06:09 PM	#1683
maskinisten diyAudio Member Join Date: Oct 2009	AR1 Hi Res based center speaker. My center speaker, based on components from a pair of AR1 Hi Res, semiactive with 2 built in 500W RMS Sunfire amps each driving a 15'' bass element. Frequency response on the original construction +/- 2db @ 18 - 23000Hz.

12th October 2009, 06:21 PM	#1684
brianpowers27 diyAudio Member Join Date: Oct 2008	Bassment prototype area. 2.5 way neo8 dipole crossed 800hz lr2 via behringer dcx2496 to 115l TL. TL hold dual RS225s. __________________ [SIZE="1"]--My Speaker building pages http://sites.google.com/site/brianpowers27speakers/

16th October 2009, 03:43 AM	#1685
jpbturbo diyAudio Member Join Date: Sep 2009 Location: The High Country	Here's my current setup based around my modified Klipsch Heresy 1's. -Josh __________________ ...sword and pistol by his side.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

18th October 2009, 08:04 PM	#1686
djn04 diyAudio Member Join Date: Dec 2008	Here are mine. They are Zaph ZRT's in a pair of cabinets I made from stacked baltic birch.

18th October 2009, 08:57 PM	#1688
djn04 diyAudio Member Join Date: Dec 2008	from a single piece of birch. It's not the cheapest way but it's incredibly stiff. The top and bottom are 3/4" and the sides are 1 1/4" thick. All the pieces were CNC'ed.

18th October 2009, 09:10 PM	#1690
djn04 diyAudio Member Join Date: Dec 2008	Here's some pictures of the internals here's what I started with

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)