Dayton nd 105-4, max bass enclosure. - diyAudio
Go Back   Home > Forums > Loudspeakers > Multi-Way
Home Forums Rules Articles diyAudio Store Gallery Wiki Blogs Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Multi-Way Conventional loudspeakers with crossovers

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Thread Tools Search this Thread
Old 9th March 2013, 06:16 PM   #1
diyAudio Member
Join Date: Aug 2012
Default Dayton nd 105-4, max bass enclosure.

I could do from .16 to 1.0 c feet for this 4"driver. Sealed and ported.
Can a TL enclosure could maximize mid bass, want to extract maximum bass with this driver. Which design could benefit me. Ahh if TL help please let me know dimensions and port length. Any other idea welcome too.
  Reply With Quote
Old 9th March 2013, 07:18 PM   #2
sreten is offline sreten  United Kingdom
diyAudio Member RIP
Join Date: Nov 2003
Location: Brighton UK

For a driver with 4.5L Vas you'll gain little with any plain
box over 9L, its really designed for a small sealed box.
5 to 7 L well stuffed makes an ideal AV satellite.

Bigger vented alignments are all a bit wacky due to the
high Qts, and simply put you'd be better off with a bigger
driver, with higher Vas, lower Fs and lower Qts for any
vented box IMO.

TL or MLTL could work, but needs careful design.

rgds, sreten.
  Reply With Quote
Old 9th March 2013, 08:57 PM   #3
diyAudio Member
Inductor's Avatar
Join Date: Feb 2006
Location: Cascais
Tell us more about your project (speakers, location).
You have the Dayton ND 105-4 already...
Can't you play with WinIsd or any other type of simulator?!
As sreten said that driver is very (port) frequency dependent (and int. volume) without a smooth frequency behavior. Very abrupt curve and nothing below a certain frequency.
  Reply With Quote
Old 9th March 2013, 11:04 PM   #4
Dissi is offline Dissi  Switzerland
diyAudio Member
Join Date: Sep 2012
Location: Winterthur
You get maximum bass in a ported cabinet of 0.3 cu ft tuned around 50 Hz. However the transient response of such an extreme alignment will be poor.

  Reply With Quote
Old 10th March 2013, 12:21 AM   #5
diyAudio Member
Inductor's Avatar
Join Date: Feb 2006
Location: Cascais
piazzafatb, as you see and Dissi was kind to post for you, F3=49 Hz,
now you can test/make your own horn for that frequency.

Last edited by Inductor; 10th March 2013 at 12:24 AM. Reason: experiment
  Reply With Quote


Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Similar Threads
Thread Thread Starter Forum Replies Last Post
Peavey Max 115 Bass amp Goldpanner Instruments and Amps 18 24th November 2016 08:51 AM
boat enclosure design for max spl? macutty Subwoofers 6 21st March 2012 03:01 AM
KEF 105.2 105/2 Service Data? Crossover Schematic? solderhead Multi-Way 6 7th October 2007 11:52 PM
Max Pentivent 1030 as bass guitar speaker labougie Subwoofers 5 26th March 2005 04:26 PM
what the max Air velocity of bass reflex port? Audist Multi-Way 4 7th February 2005 08:43 PM

New To Site? Need Help?

All times are GMT. The time now is 05:26 AM.

vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Copyright 1999-2017 diyAudio

Content Relevant URLs by vBSEO 3.3.2