diyAudio (
-   Multi-Way (
-   -   2 Tube Vents to make equivalent from one (

krafty 25th February 2013 11:39 PM

2 Tube Vents to make equivalent from one

In a enclosure with 4.1 Liters having a 17cm long x. 40mm diameter tube vent required... what length should I use if I need to switch the project to 2 tubes, one being 50mm and other 40mm diameter. (Just made a mistake with the enclosure and don't want to throw it away, these two holes).

PeteMcK 26th February 2013 12:22 AM

The Subwoofer DIY Page - Port Calculations

phase_accurate 26th February 2013 06:38 AM

I would use only the 40 mm port and cover the other hole with something that looks nice (design yourself as label).
Simple as that.
If you were to use both ports they would get quite long and use up too much of your internal volume.



All times are GMT. The time now is 08:53 AM.

vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Copyright 1999-2017 diyAudio

Content Relevant URLs by vBSEO 3.3.2