Atlas Sound ATP-34T Help - diyAudio
Go Back   Home > Forums > Loudspeakers > Multi-Way

Multi-Way Conventional loudspeakers with crossovers

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 14th February 2013, 02:51 AM   #1
diyAudio Member
 
Join Date: Feb 2013
Default Atlas Sound ATP-34T Help

I just bought two used Atlas Sound ATP-34T loudspeakers that I need to install at our local Little League fields. I am mechanically inclined and have an electrical background, but when it comes to audio, I'm in the dark.

So...these units have two connections, I'm assuming they're high and low (power and ground) and a selector to select impedance. Ok, here's where I show my complete ignorance. We have no amp, but I don't think we'll need one, right? It not, how do these get wired up? I know we'll need a handset or microphone to make announcements, but what would the basic wiring look like? Again, I'm a dummy when it comes to sound, but do they sell mikes that plug into the wall and wire up to and power these units?

I'm open to any kind of help, suggestions, advice, etc.

Thank you,

Campo619
  Reply With Quote
Old 14th February 2013, 06:02 AM   #2
DUG is offline DUG  Canada
diyAudio Member
 
Join Date: Jan 2003
Location: mississauga ontario canada
"...but do they sell mikes that plug into the wall and wire up to and power these units?"

Yes, they actually do and they are called PA (for Public Address) Amplifiers.

And that is what you need.

Find the impedance and power rating of your speakers.

Then search for an PA amp and microphone.

Good Luck
__________________
Doug We are all learning...we can all help
"You can't stop the signal, Mal. Everything goes somewhere..."
  Reply With Quote

Reply


Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
What should I do with an AA atlas 15? eisenhower Subwoofers 0 7th January 2007 04:37 AM
Atlas 15 Tweeker Swap Meet 3 8th December 2005 05:08 PM
Atlas 15 feeler path914 Swap Meet 3 1st December 2005 08:34 PM
Anyone measure the Atlas 12 yet johnmark Subwoofers 28 30th June 2005 11:47 PM
amp for atlas 12's danvan Car Audio 0 5th May 2005 05:36 PM


New To Site? Need Help?

All times are GMT. The time now is 12:46 PM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio

Content Relevant URLs by vBSEO 3.3.2