scan-speak 9300 problem

macgyver · 14th November 2003, 12:39 PM

Hello!
I have pair of the ss9300 tweeters. The problem is that other tweeter sounds a bit darker than the other. Both are almost new and the crossover is working (I have swithed the tweeters). So what is wrong with the tweeter? sorry my english... I'm from finland.

BobM · 14th November 2003, 01:22 PM

It's always possible that one has a problem. When I got mine I had to realign the voice coil. It had slipped slightly during shipping and caused a buzz at certain resonant frequencies. Tightening the screws, once aligned, prevented this from occurring again.

You say they're new - giove them a little time. If they still sound noticeably different after 100 hours of break-in then I would return them to the dealer where you got them and get a second pair.

Goof luck,
Bob

14th November 2003, 12:39 PM	#1
macgyver diyAudio Member Join Date: Aug 2002 Location: Finland	scan-speak 9300 problem Hello! I have pair of the ss9300 tweeters. The problem is that other tweeter sounds a bit darker than the other. Both are almost new and the crossover is working (I have swithed the tweeters). So what is wrong with the tweeter? sorry my english... I'm from finland.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Scan Speak voice coil problem?	dallaire	Multi-Way	1	23rd October 2008 02:04 PM
FS- Scan-Speak MTM 8546/9300	BDP	Swap Meet	13	21st May 2007 11:43 PM
scan-speak 3-way	dre73	Multi-Way	1	18th November 2005 01:05 AM
what is the problem with the Scan Speak scanspeak 7xxxxxx	diysmartdeep21	Multi-Way	21	14th February 2005 11:59 AM
A problem (or not) with Scan-Speak 9500, please help	Misa A.	Multi-Way	7	10th January 2004 03:30 PM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

14th November 2003, 01:22 PM	#2
BobM diyAudio Member Join Date: Apr 2003 Location: Long Island, New York	It's always possible that one has a problem. When I got mine I had to realign the voice coil. It had slipped slightly during shipping and caused a buzz at certain resonant frequencies. Tightening the screws, once aligned, prevented this from occurring again. You say they're new - giove them a little time. If they still sound noticeably different after 100 hours of break-in then I would return them to the dealer where you got them and get a second pair. Goof luck, Bob

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)