Accuton three way project - diyAudio
Go Back   Home > Forums > Loudspeakers > Multi-Way
Home Forums Rules Articles diyAudio Store Gallery Wiki Blogs Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Multi-Way Conventional loudspeakers with crossovers

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Thread Tools Search this Thread
Old 1st January 2013, 07:55 PM   #1
Join Date: Dec 2004
Default Accuton three way project

please help me in this. I want to DIY a three way speaker using Accuton drivers. suggest me what to do. I've heard Marten Getz and I think this is the sound I like to hear in entire my audiophile life

any help appreciated
  Reply With Quote
Old 1st January 2013, 08:16 PM   #2
diyAudio Member
jerome69's Avatar
Join Date: Feb 2008
Location: Lyon
Accuton is very expensive. I never see a full three way DIY Accuton.
But you can see : Jenzen-Accu
You will not so far to a full Accuton speaker. The audio tech is a very good driver.
  Reply With Quote
Old 4th January 2013, 12:38 PM   #3
diyAudio Member
danny_66's Avatar
Join Date: Jun 2005
Location: Lierde
I just finished a 3-way with the Accuton C173-6-090 as mid driver:
My RefSpeaker
I am very pleased with the result
  Reply With Quote
Old 4th January 2013, 04:09 PM   #4
diyAudio Member
stonehome's Avatar
Join Date: May 2005
Location: Cave Creek, Az
Take look at Tony Gee's site. Humble Homemade Hifi He has designed 2 speakers using Accuton drivers. "The Humble Statement" and "The Soup Ceramique Mk II". They are archived in his download section. I built a pair of his design using an Eton woofer. Very, very good.
  Reply With Quote
Old 5th January 2013, 08:28 AM   #5
diyAudio Member
Join Date: Nov 2003
Location: Eindhoven
I join Stonehome ;
I had the same idea as yours and was calculating, and searching, prices of the units.Then I was lucky to spot a pair of "Eidoclones" , which were cheaper then the sepatate units. They were "voiced" by Tony Gee ; he did the x-over with very expensive parts.
Also the Eton woofer ; but a bigger one as the one Stonehome uses.
They are very critical about the electronics ; I use a Jungson d88 class A amp.
Wish you good luck on your choises and if I can be of any help ; just let me know.
The DIY-virus stroke again ; now working on a 3-way eton set with a visaton KE25 tweeter ; sounds , at least in my room , better then the "Eidoclones".
Attached Images
File Type: jpg Afbeelding 007.jpg (357.0 KB, 367 views)
File Type: jpg DSCF7917a.JPG (314.9 KB, 355 views)
  Reply With Quote
Old 5th January 2013, 08:49 AM   #6
diyAudio Member
jerome69's Avatar
Join Date: Feb 2008
Location: Lyon
Wyatt Acoustics Soup Sandwich (pair)
  Reply With Quote


Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Similar Threads
Thread Thread Starter Forum Replies Last Post
Accuton 3-ways ? Jussi Multi-Way 136 21st January 2014 01:20 AM
My Accuton project dsrviola Multi-Way 3 12th July 2009 12:00 PM
My Accuton project dsrviola Multi-Way 0 12th July 2009 08:11 AM
accuton...where ? ermes Multi-Way 0 10th December 2006 05:34 PM
Accuton C92-6+ETON ER4 project Alex_J Multi-Way 9 6th October 2006 06:21 PM

New To Site? Need Help?

All times are GMT. The time now is 09:37 PM.

vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Copyright 1999-2017 diyAudio

Content Relevant URLs by vBSEO 3.3.2