diyAudio

diyAudio (http://www.diyaudio.com/forums/)
-   Multi-Way (http://www.diyaudio.com/forums/multi-way/)
-   -   Looking for diy active speakers (http://www.diyaudio.com/forums/multi-way/226691-looking-diy-active-speakers.html)

kumori 30th December 2012 04:33 PM

Looking for diy active speakers
 
Hallo,

are there some established diy designs or kits out there for 2- or 3-way active speakers?

My long term plan involves building some really good speakers (at some point in the future, I do not have time & the money at the moment), but I only find "conventional" designs with passive crossovers. I am looking for well documented kits (from people who know what they are doing with the speakers, unlike me) with good drivers and cabinet buildings.

As I see it, all good 2- or 3-way diy designs with expensive drivers always use crossover parts that easily exceed the price of the drivers, making the hole package even more expensive.

Also, for good results, shortcomings in the frequency response are often addressed with correction networks in the crossover, what makes just swapping the passive crossover with an active one not possible.

So, assuming there are benefits from an active solution (without opening a discussion about this here):
Are there any documented and approved designs, that only need an active crossover? With active crossover, I mean a simple allen-key, or similiar arrangements, no DSP based solutions.
For example: Here is a box with two drivers, it sounds good without correction networks and needs an active filter at this frequency with this steepness...

I know there a some manufacturers like Wilmslow-Audio that can build and design something to your needs, but this is somehow "closed source". The diy world is full of openly discussed designs for nearly everything, but for active speakers, I donīt seem to find something... Maybe it is more easy than I think.

Any hints appreciated,
Thanks
Flo

merlin el mago 30th December 2012 04:41 PM

A member is selling here:

http://www.diyaudio.com/forums/swap-...-monitors.html

I'm not affiliate & don't have commision.

Good lucky.
Felipe

kumori 30th December 2012 06:49 PM

Thanks Filipe,

I should have stated this earlier, but I am looking for a standmount speaker, with higher cabinet volume. I doesnīt have to be a 15 inch sub, but slightly bigger than the posted monitors...

Here are some designs that I find interesting, but both of them use some passive correction networks. I canīt really tell if that would make them unusable with active crossovers...

Illumina-66

VOGUE - Platinum

http://www.hificritic.com/downloads/...RITIC_TRK1.pdf

kumori 30th December 2012 07:41 PM

:rolleyes: OK, I just realized, this is the wrong sub forum. Damn...

pinkmouse 30th December 2012 08:21 PM

Sorted. :)

kumori 30th December 2012 08:25 PM

:) Thanks

Ahmad_tbp 30th December 2012 08:41 PM

first of all I love Troels Gravesen projects , that illumina-66 looks stunning ,
I looked for something like you do but for less general use (active monitors) and I ended up with NOTHING , there s not that much active designs out there , Linkwitz Lab - Loudspeaker Design has some designs for an active system and it sells all the boards you need for that , with abit of knowledge you can make it to work with any setup you want , but that s far beyond my experience , Finally I give active xo idea up , cuz what I look for can easily (and less expensive) and even better be done by DSPs , but to ease your pain they are not that much designs for active xos and one of the reason is you have to design an xo specially for a certain kinda speaker and cabinet in mind , and doing so needs some knowledge , lotsa experience and some measuring equipment ...

Regards
Ahmad

john k... 30th December 2012 08:57 PM

I have two systems which can be built as fully active. One is dsp based, the other can be build with analog or dsp crossover.

kumori 30th December 2012 10:49 PM

Ahmad, yes, the Gravensen projects are really great. I am also aware of the linkwitz projects, but they are not really what I am looking for.

Regarding the chrossovers, I think it is not too difficult to implement the right kind of filter, provided its crossover-frequency and steepness are known. I have to admit, dsp based solutions are much more flexible here. However, the thing I don't like about dsp is that you need multiple dacs or some dsp based poweramps. Neither of which I have.

I would like to go active the "classic" way, by inserting an analoge active crossover after the pre and a second (or third, if it has to be) poweramp and that's it.

John, did you build your speakers on your own?

Ahmad_tbp 31st December 2012 08:33 AM

Quote:

Originally Posted by kumori (Post 3304902)
Regarding the chrossovers, I think it is not too difficult to implement the right kind of filter, provided its crossover-frequency and steepness are known.

yes , if you read articles on linkwitz and some other like Rod Elliott on electronic filters you can build one easily , but in case you dont know keep in mind that it s not only an active XO you need to do some shelf filters ,BSC , notch filters as well maybe ... but if i were you i would forget about it for now till I really know how to design an active XO , I would first build a passive one since designing a good active xo is not that easy and you need lotsa error and trial if you don have some equipment ,
Quote:

Originally Posted by kumori (Post 3304902)
I have to admit, dsp based solutions are much more flexible here. However, the thing I don't like about dsp is that you need multiple dacs or some dsp based poweramps. Neither of which I have.

whatt ? dsps don t need dacs or dsp based poweramps (what does it even mean) , DSPs usually has 2 RCA input , and 4 or 6 or more RCA output , it has built in DAC , ADC (you can use outside DACs with it but it s an option) and all you need to do is plug it to pc via USB and run the filters on it ,you can connect any RCA to inputs and then connect outputs to ANY power amp you like ...


All times are GMT. The time now is 12:20 PM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright Đ1999-2014 diyAudio


Content Relevant URLs by vBSEO 3.3.2