Some help here please.
http://www.jblproservice.com/pdf/Sound%20Power%20I-Series/I710P.pdf
I'm building them from scratch - different shaped box (same volume). BUT, they will be used for surrounds and installed 'in-wall' with the speaker baffle exactly flush with the wall.
What components on the crossover network should I try swapping/experimenting with to get rid of or reduce the BSC.?
I can do measurements in the final analysis but need some idea around the component(s) I should look at before I construct the crossover. This will help me make allowances for swapping in/out before the final board make up is settled on and soldered.
Appreciate your help....
http://www.jblproservice.com/pdf/Sound%20Power%20I-Series/I710P.pdf
I'm building them from scratch - different shaped box (same volume). BUT, they will be used for surrounds and installed 'in-wall' with the speaker baffle exactly flush with the wall.
What components on the crossover network should I try swapping/experimenting with to get rid of or reduce the BSC.?
I can do measurements in the final analysis but need some idea around the component(s) I should look at before I construct the crossover. This will help me make allowances for swapping in/out before the final board make up is settled on and soldered.
Appreciate your help....
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.