Go Back   Home > Forums > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Multi-Way Conventional loudspeakers with crossovers

who can turn small LA Horn
who can turn small LA Horn
Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Thread Tools Search this Thread
Old 24th October 2012, 05:02 AM   #1
limono is offline limono  United States
diyAudio Member
Join Date: Mar 2007
Default who can turn small LA Horn

from solid wood i.e walnut? I'm looking into commissioning a pair of 650-1000Hz Le cleach 1" horn from Walnut (I would provide suitable slabs of material) It's not a priority project just wonder how much I need to set aside to get it done.
  Reply With Quote
Old 24th October 2012, 05:58 AM   #2
badman is offline badman  United States
diyAudio Member
badman's Avatar
Join Date: Sep 2003
Location: Sunny Tustin, SoCal
Not I (lathe? I wish!) but I'd just recommend- put solid terms in writing- what happens if the slab cracks, or the guy takes longer than you expected, etc. Saves heartache, shares risk, etc.
"The dawn of Bose created the "Man Cave" and reduced testoterone levels worldwide by 18.5 per cent" Peteleoni
  Reply With Quote
Old 24th October 2012, 06:55 AM   #3
Ed LaFontaine is offline Ed LaFontaine  United States
diyAudio Member
Ed LaFontaine's Avatar
Join Date: Feb 2004
Location: where the Appalachians rise from the Blue Grass
Large pieces of uncured wood may be soaked in a solution of polyethylene glycol 1000 to stabilize it. That requires time. It also takes the life out of the wood. It renders the nature of the wood into something less pleasing to look at. Just sayin', not recommending.

Getting it turned requires drawings first....Have you got the profile to work from? Then finding the turner who has a lathe large enough for the project. I may be at your service...

Gluing suitably sized pieces of dry (6-8% MC) is an option if your aesthetics allow. It would be quicker.

Is this what you want? If so, One would need to swing about 13" over the bed. The throat would need to be full section above the driver mount to maintain enough strength. Said another way: There would be no reduction in x-section as there is in the fiberglass rendering.


Click the image to open in full size.

Last edited by Ed LaFontaine; 24th October 2012 at 07:15 AM.
  Reply With Quote
Old 24th October 2012, 01:19 PM   #4
limono is offline limono  United States
diyAudio Member
Join Date: Mar 2007
Ok, I was not precise because it's just preliminary market research The "slab" would be glued 2"-3" pieces of a ....well slabs. This shouldd prevent cracking but if it happens , that's the nature of wood and wood filler was invented for it. It would be 8 weeks kiln dried lumber to 7% of MC. Yes the drawing and cut profile would be provided (maybe even all the numbers for CNC from Volvotreter site). The driver would be crossed at 2-3Khz so the exact cut-off for the horn is still in question. I just wonder if somebody here is doing that and would be willing to get it done for reasonable money .

Last edited by limono; 24th October 2012 at 01:22 PM.
  Reply With Quote
Old 24th October 2012, 01:44 PM   #5
tinitus is offline tinitus  Europe
diyAudio Moderator R.I.P.
Join Date: Nov 2005
who can turn small LA Horn
sounds like it will be a difficult job
and really, for a 'consumer' things have changed quite a lot lately
  Reply With Quote
Old 24th October 2012, 03:54 PM   #6
LJNorth is offline LJNorth  United Kingdom
diyAudio Member
Join Date: Nov 2011
Location: Winch
I havent had any problems with cracking or splits on my waveguides, just use seasoned wood, using cross laminated pieces would probably reduce the risk further, remember to seal the pores afterwards and be sensible about wall thickness (i.e. not paper thin).

I really think filler would spoil a nice wood. As for the finish, I guess a CNC'd piece of wood will need plenty of sanding afterwards and a sanded finnish just isnt as good as a clean cut for bringing out the natural grain of timber, which is why cabinet makers use cabinet scrapers and not sand paper.

  Reply With Quote
Old 24th October 2012, 05:29 PM   #7
djn is offline djn  United States
diyAudio Member
djn's Avatar
Join Date: Oct 2004
Location: Albuquerque, New Mexico
With your skills (and I know you got them) you should spend the money on a lath.

I have templates for the 2 we turned for George and Dan. I think they are 800hz and 1200hz. Tractrix not LA.
  Reply With Quote


who can turn small LA HornHide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Klipsch bass horn(La Scala) rvrazvan Multi-Way 28 3rd January 2012 09:35 PM
bass section horn klipsh la scala jbsteeple Multi-Way 2 31st July 2006 06:28 PM
A Half ABC Lost In GC La La Land S.C Introductions 3 6th March 2004 04:06 PM
looking for 6.5inch woofers suitable for a 30 - 35Hz horn... and a small horn too :P SkinnyBoy Multi-Way 24 13th February 2004 06:06 AM

New To Site? Need Help?

All times are GMT. The time now is 11:54 AM.

Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 15.79%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Copyright ©1999-2018 diyAudio