Can anyone figure out how these work?

Remlab · 19th October 2012, 12:39 PM

Where are the woofers??
Brodmann Acoustics: VC 7

DrDyna · 19th October 2012, 12:52 PM

These speakers use resonating panels. The woofers are in the sides, but covered by the panels somehow. Here's a picture that might help.

wintermute · 19th October 2012, 12:53 PM

Inside I would imagine, have a look at the picture on the right, notice what appears to be a slot from top to bottom on the edge of the baffle... 1st time I've seen a speaker with two tweeters

Tony.

Remlab · 19th October 2012, 10:29 PM

Just found this. Acoustically transparent screens on the side. The frequency response must be terrible! rmaf8

Remlab · 19th October 2012, 11:17 PM

Quote:

Originally Posted by wintermute

Inside I would imagine, have a look at the picture on the right, notice what appears to be a slot from top to bottom on the edge of the baffle... 1st time I've seen a speaker with two tweeters

Tony.

There are more than a few companies that use two tweeters. Here's a couple..

Dynaudio - All there is.
Focus Audio - High End Audiophile Loudspeaker

triplej · 21st October 2012, 09:45 AM

I heard these briefly at the Sydney HiFi show today. They were on first impression the “best sound of the show” for me. I’ve subsequently done the research and would be concerned about their ability to perform on all types of music given this resonant panel approach. I would certainly go out of my way to hear them again with more complex music. They sounded very, very good on the demo tracks.

19th October 2012, 12:39 PM	#1
Remlab diyAudio Member Join Date: Apr 2011 Location: Mission Viejo Ca	Can anyone figure out how these work? Where are the woofers?? Brodmann Acoustics: VC 7 __________________ It's not what you don't know that causes trouble. It's what you do know that just ain't so..Mark Twain

19th October 2012, 12:53 PM	#3
wintermute just another diyAudio Moderator Join Date: Aug 2003 Location: Sydney Blog Entries: 22	Inside I would imagine, have a look at the picture on the right, notice what appears to be a slot from top to bottom on the edge of the baffle... 1st time I've seen a speaker with two tweeters Tony. __________________ Any intelligence I may appear to have is purely artificial! Some of my photos

19th October 2012, 10:29 PM	#4
Remlab diyAudio Member Join Date: Apr 2011 Location: Mission Viejo Ca	Just found this. Acoustically transparent screens on the side. The frequency response must be terrible! rmaf8 __________________ It's not what you don't know that causes trouble. It's what you do know that just ain't so..Mark Twain

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Help me figure something out....Please	sturmj	Solid State	1	12th January 2012 08:16 AM
Help, can't figure out what resistors these are	Nagamitsu	Car Audio	14	22nd June 2011 03:22 AM
I can't figure out this old transformer.	pinkphiloyd	Parts	2	10th May 2011 09:01 PM
Can Anyone figure this?	duderduderini	Tubes / Valves	8	6th April 2008 01:27 PM
help me figure this out please	xdissent	Solid State	7	23rd November 2003 08:57 AM


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

21st October 2012, 09:45 AM	#6
triplej diyAudio Member Join Date: Jun 2011 Location: Sydney	I heard these briefly at the Sydney HiFi show today. They were on first impression the “best sound of the show” for me. I’ve subsequently done the research and would be concerned about their ability to perform on all types of music given this resonant panel approach. I would certainly go out of my way to hear them again with more complex music. They sounded very, very good on the demo tracks.

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read