And Now For Something REALLY BIG - Page 69

Pano · 24th November 2012, 07:13 PM

Don't feel too bad, I've never had any luck understanding HR at all. I can learn most software, but HR just doesn't not compute for me.

Someday I hope to get someone to tutor me in its arcane ways.

JRKO · 24th November 2012, 08:16 PM

Mrs JRKO had a glass of wine I had..........more. In my defence we were watching Hitch

Thanks Pano. I got winisd straight away but I kind of feel like I'm playing (or failing to play) a text based computer game of days gone by with HR

It doesn't help that I don't understand all the workings behind it.

Can anyone help with the flare rate & measurements of the 1005 based on the info Pano & GM have given?

I hope to maybe start 'mache madness' on Monday all being well

Josephjcole · 24th November 2012, 10:32 PM

There is certainly a learning curve involved.... have you seen this tutorial?

hornresp for dummies

There is a lot to it, but once you get the basics it's not too bad.

I'm quite curious what you come up with. I just got a pair of used Radian drivers in the mail. I was planning on having my father-in-law turn me some round horns, but this thread has me thinking about building some mulitcell horns....
Best of Luck!

Cal Weldon · 24th November 2012, 11:46 PM

Quote:

Originally Posted by JRKO

Can anyone help with the flare rate & measurements of the 1005 based on the info Pano & GM have given?

If there's any chance you want to go for the same cells as an 1803 I could give all measures at whatever intervals you wanted and do it as early as tomorrow. If so do you want them in inches or cms?

Pano · 25th November 2012, 01:54 AM

Ditto for the 1005, if you want them.

JRKO · 25th November 2012, 07:33 AM

!!!Cal & Pano to the rescue!!!

THANKS GUYS

Can I be greedy and ask for both in centimetre increments please? As it only paper I might get away with both

There seems to be some interest in this brilliant, low cost idea of Pano's so the more the merrier me thinks!

Pano · 25th November 2012, 01:03 PM

OK, I'll have to dig out the tape measure with cm markings. I greatly prefer metric, but live in a country were it is considered an evil foreign plot. ;(

(I feel that fractions are an evil plot to confuse me)

freax · 01:15 PM

Good man, welcome to metric fellow comrade!

JRKO · 25th November 2012, 01:31 PM

Quote:

Originally Posted by Pano

...but live in a country were it is considered an evil foreign plot. ;(

(I feel that fractions are an evil plot to confuse me)

Metric is the thin edge of the wedge. Wait until your banana's have to be straight, it's illigal to sell in lbs so greengrocers get fines for giving little old ladies half a lb of grapes

Its all madness, pure madness

Fractions however are the devils work and especially fiendish when they are of inches like 3"3/16

Pano · 25th November 2012, 01:34 PM

Quote:

Originally Posted by JRKO

... inches like 3"3/16

Ahhhhhh!!! Nooo! My brain hurts, Mr. Gumby!

24th November 2012, 07:13 PM	#681
Pano diyAudio Moderator Join Date: Oct 2004 Location: North Carolina Blog Entries: 4	Don't feel too bad, I've never had any luck understanding HR at all. I can learn most software, but HR just doesn't not compute for me. Someday I hope to get someone to tutor me in its arcane ways. __________________ Take the Speaker Voltage Test!

24th November 2012, 08:16 PM	#682
JRKO diyAudio Member Join Date: Dec 2003 Location: U.K.	Mrs JRKO had a glass of wine I had..........more. In my defence we were watching Hitch Thanks Pano. I got winisd straight away but I kind of feel like I'm playing (or failing to play) a text based computer game of days gone by with HR It doesn't help that I don't understand all the workings behind it. Can anyone help with the flare rate & measurements of the 1005 based on the info Pano & GM have given? I hope to maybe start 'mache madness' on Monday all being well __________________ In the interests of full disclosure JRKO = James Rupert Kingsley Osborne. And yes, my parents will pay for it when I choose their retirement home

25th November 2012, 07:33 AM	#686
JRKO diyAudio Member Join Date: Dec 2003 Location: U.K.	!!!Cal & Pano to the rescue!!! THANKS GUYS Can I be greedy and ask for both in centimetre increments please? As it only paper I might get away with both There seems to be some interest in this brilliant, low cost idea of Pano's so the more the merrier me thinks! __________________ In the interests of full disclosure JRKO = James Rupert Kingsley Osborne. And yes, my parents will pay for it when I choose their retirement home

25th November 2012, 01:11 PM	#688
freax Owner and operator of irc.tenettenba.info diyAudio Member Join Date: Sep 2007 Location: NSW	Good man, welcome to metric fellow comrade! __________________ Last edited by freax; 25th November 2012 at 01:15 PM.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

24th November 2012, 10:32 PM	#683
Josephjcole diyAudio Member Join Date: Jun 2004 Location: Wisconsin	There is certainly a learning curve involved.... have you seen this tutorial? hornresp for dummies There is a lot to it, but once you get the basics it's not too bad. I'm quite curious what you come up with. I just got a pair of used Radian drivers in the mail. I was planning on having my father-in-law turn me some round horns, but this thread has me thinking about building some mulitcell horns.... Best of Luck!

25th November 2012, 01:54 AM	#685
Pano diyAudio Moderator Join Date: Oct 2004 Location: North Carolina Blog Entries: 4	Ditto for the 1005, if you want them.

25th November 2012, 01:03 PM	#687
Pano diyAudio Moderator Join Date: Oct 2004 Location: North Carolina Blog Entries: 4	OK, I'll have to dig out the tape measure with cm markings. I greatly prefer metric, but live in a country were it is considered an evil foreign plot. ;( (I feel that fractions are an evil plot to confuse me)

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Transformers: How big is TO big??	dfdye	Power Supplies	39	4th September 2010 02:30 PM
Big Toroids & Big Caps	K-amps	Swap Meet	10	25th June 2009 07:43 PM
Having problems with port size... how big is far too big?	fjhuerta	Multi-Way	10	30th August 2005 06:20 PM
Big Big hum ???	vlljpior	Tubes / Valves	4	26th August 2005 03:53 AM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read