Vifa DX25TG05-04 + P17WJ00-08 Good Pair?

RickH · 17th September 2012, 10:11 PM

Hi everyone

I just want to make sure this is a good combination, provided I use the proper crossover.

The reason I ask is that I already have the tweeters from a project I never started. I was going to sell them but found the P17WH is available.

I'm considering something like a TL and I've found several online examples using the woofer, just no examples with the same woofer and tweeter.

I've also attached specs for the other woofer I might consider, the smaller P13WH. Would this work with the tweeters I have as well? Thanks in advance.

Rick

sreten · 18th September 2012, 01:12 AM

Hi,

An old 6.5" driver with some consistency issues and a fairly modern tweeter.

https://sites.google.com/site/undefinition/diy/amiga

might be better.

rgds, sreten.

prairieboy · 22nd September 2012, 11:52 PM

Vifa P17WJs are currently available, made in China. Main concern is that they don't measure anywhere close to that spec sheet. I have four, purchased from a reputable suppliers (Madisound & Solen) and the specs on those are close (within a reasonable tolerance) to each other, and miles away from the 'specs'. That would mean that using any plan based on 'old' units, or that data sheet, will be miles off for newly purchased drivers.

18th September 2012, 01:12 AM	#2
sreten diyAudio Member Join Date: Nov 2003 Location: Brighton UK	Hi, An old 6.5" driver with some consistency issues and a fairly modern tweeter. https://sites.google.com/site/undefinition/diy/amiga might be better. rgds, sreten. __________________ There is nothing so practical as a really good theory - Ludwig Boltzmann When your only tool is a hammer, every problem looks like a nail - Abraham Maslow

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
FS: Vifa DX25TG05-04 tweeters	Donald North	Swap Meet	1	10th February 2011 12:19 AM
WTB: Vifa P17WJ00-04	jmillerdoc	Swap Meet	1	11th October 2010 11:26 PM
WTB: One Vifa P17WJ00-04 Mid-Woofer	GordonW	Swap Meet	1	29th September 2008 04:11 PM
looking for good vifa P17WJ00-08/XT25TG designs	JLC7	Multi-Way	8	28th May 2008 10:09 AM
Audax TW025A2 vs. Vifa DX25TG05-04	centaurus3200	Multi-Way	6	1st September 2006 04:15 PM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

22nd September 2012, 11:52 PM	#3
prairieboy diyAudio Member Join Date: Nov 2010	Vifa P17WJs are currently available, made in China. Main concern is that they don't measure anywhere close to that spec sheet. I have four, purchased from a reputable suppliers (Madisound & Solen) and the specs on those are close (within a reasonable tolerance) to each other, and miles away from the 'specs'. That would mean that using any plan based on 'old' units, or that data sheet, will be miles off for newly purchased drivers.