loudspeaker enclosure design - diyAudio
Go Back   Home > Forums > Loudspeakers > Multi-Way

Multi-Way Conventional loudspeakers with crossovers

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 8th September 2012, 06:57 AM   #1
diyAudio Member
 
Join Date: Jul 2012
Location: Verona
Default loudspeaker enclosure design

hi I want to put these two loudspeaker into one box
the tweeter HT-22/8
and the woofer http://coralelectronic.com/pdf_retur...df=1&prod=1791
In my design every loudspeaker has its own amplifier which means that the music signal goes through an electronic active crossover of the 2nd order, where the frequency band is splitted in two bands one from 20 hz to 2.5 khz for the woofer, the other from 2.5 khz to 20 khz for the tweeter. now what book or free software can i use to model the dimension of the enclosure considering that both the loudspeaker are inside the same enclosure?
  Reply With Quote
Old 8th September 2012, 07:23 AM   #2
diyAudio Member
 
Moondog55's Avatar
 
Join Date: Jun 2007
Location: Norlane; Geelong: Victoria: Australia
There is simply not enough information there to design a proper box for that driver, important parameters are missing.
You need Vas, Qms and Qes for you to work out the volume of the box.
To me it looks like a reasonably efficient midrange to go with a huge woofer.
__________________
QUOTE" The more I know, the more I know, I know (insert maniacal laugh >here<) NOTHING"
  Reply With Quote
Old 8th September 2012, 07:27 AM   #3
diyAudio Member
 
picowallspeaker's Avatar
 
Join Date: Apr 2007
Hi ,
you probably need a waveguide for that cone tweeter , as it
may help a transition-less dispersion characteristic
at crossover frequency . Can you find some 6-7" unused speakers ?
Also doubling the amplifiers is quite unuseful , since the tweeter absorbs
very little energy .
Apart from this , the woofer has a stiff suspension and it's rated at 4Ω .
That don't mean nothing
The tweeter is closed on the back so the problem if put in the same
enclosure is leakage from the mounting hole .
Don't know of any good online program to calculate the box
because it simply is not possible to do that without knowing
the specific driver ( and the programs use the Thiele / Small parameters of the
speaker to do it , which are not present on the Coral paper you produced ... not that they are essential for a car product , intended to be mounted in a leaky environment )
  Reply With Quote
Old 8th September 2012, 07:47 AM   #4
diyAudio Member
 
Join Date: Jul 2012
Location: Verona
thanks i've asked the two companies i hope the will give me those parameters
  Reply With Quote
Old 8th September 2012, 08:02 AM   #5
diyAudio Member
 
picowallspeaker's Avatar
 
Join Date: Apr 2007
For the tweeter they are useless because it has already a 'chamber' behind the membrane .
Also for the woofer . Main reason for the existence of the enclosure is
to separate the front emission from the back emission .
It can also control the movement of the cone , like in pneumatic suspension (closed box )where the air acts like a spring , or in bass reflex where the resonance of the air inside is used to contribute to woofer's emission , trough a duct .
  Reply With Quote
Old 9th September 2012, 02:26 PM   #6
diyAudio Member
 
Join Date: Jul 2012
Location: Verona
so the fact that the tweeter has a chamber behind the membrane means that it doesn't have back emission? if so can i consider the enclosure as if there is only the woofer inside it? the woofer doesn't have a chamber behind the membrane so it has a back emission right?
  Reply With Quote

Reply


Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Guitar amp loudspeaker(s) enclosure akis Instruments and Amps 13 25th October 2011 05:57 PM
which loudspeaker design? maghen Multi-Way 128 2nd October 2009 09:10 PM
Loudspeaker Enclosure guru_jeff Multi-Way 6 20th December 2006 08:20 PM
RJ loudspeaker enclosure plovati Multi-Way 13 1st September 2005 01:51 AM
3-way 10/12&quot; Loudspeaker Enclosure makaveli17 Multi-Way 0 7th April 2004 09:47 PM


New To Site? Need Help?

All times are GMT. The time now is 12:58 PM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio

Content Relevant URLs by vBSEO 3.3.2