hi, i won these drivers on ebay and there is no markings on them so i have no idea what they are i contacted the guy and he said this....
(They are an french imported clone of b&w cm4's and as such do not have a specific make.
A good bass/midrange driver.
I noticed they worked well in a 2 cubic foot enclosure, crossover at 5khz.
For use as a quality general purpose driver up to professional use.)
still not much for me to go off, ive searched google for hours with no luck! ive had a multi meter on them and they are 8ohms and measure 7"s total.
(They are an french imported clone of b&w cm4's and as such do not have a specific make.
A good bass/midrange driver.
I noticed they worked well in a 2 cubic foot enclosure, crossover at 5khz.
For use as a quality general purpose driver up to professional use.)
still not much for me to go off, ive searched google for hours with no luck! ive had a multi meter on them and they are 8ohms and measure 7"s total.
Attachments
Hi,
They may be a clone of the CM4's 0.5 way driver, but expect a large
peak in the response typical of most metal coned bass/mid drivers.
Measurements and an elliptical crossover are usually needed,
see : Zaph|Audio It outlines the general approach.
rgds, sreten.
They may be a clone of the CM4's 0.5 way driver, but expect a large
peak in the response typical of most metal coned bass/mid drivers.
Measurements and an elliptical crossover are usually needed,
see : Zaph|Audio It outlines the general approach.
rgds, sreten.
After all this time ive come across the manufacturer off these speakers. Alcone AC 6.5 HE, https://www.lautsprechershop.de/pdf/alcone/ac65he.pdf . Very happy
as I won these on ebay for £10ish.
as I won these on ebay for £10ish.
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.