diyAudio

diyAudio (http://www.diyaudio.com/forums/)
-   Multi-Way (http://www.diyaudio.com/forums/multi-way/)
-   -   The "Event Horizon" (an ambiopole) (http://www.diyaudio.com/forums/multi-way/217096-event-horizon-ambiopole.html)

Melo theory 31st July 2012 10:52 AM

The "Event Horizon" (an ambiopole)
 
Started by drawing a grid, and drilling 1/8th" holes.

http://i167.photobucket.com/albums/u124/melojason/1.jpg

Melo theory 31st July 2012 10:52 AM

Ten the routing begins :p

http://i167.photobucket.com/albums/u124/melojason/2.jpg

Melo theory 31st July 2012 10:53 AM

More routing.

http://i167.photobucket.com/albums/u124/melojason/3.jpg

Melo theory 31st July 2012 10:54 AM

That was a template out of MDF.
I used a tracer bit for this baltic birch.

http://i167.photobucket.com/albums/u124/melojason/4.jpg

Melo theory 31st July 2012 10:56 AM

I mad a jig to work on the bend. It was a pisser.
I eventually had to cut relief slots.
I even steamed this in my shower. wouldn't keep a bend.

http://i167.photobucket.com/albums/u124/melojason/5.jpg

Melo theory 31st July 2012 10:57 AM

The back of the baffle.

http://i167.photobucket.com/albums/u124/melojason/6.jpg

Melo theory 31st July 2012 10:59 AM

Now on to the support poles.
I attached a u rod to the wall with the router attached, to make an arc for a 9' focused array.

http://i167.photobucket.com/albums/u124/melojason/7.jpg

Melo theory 31st July 2012 11:05 AM

The inside of the inside poles.

http://i167.photobucket.com/albums/u124/melojason/8.jpg

Melo theory 31st July 2012 11:06 AM

The outside of the inside poles.

http://i167.photobucket.com/albums/u124/melojason/9.jpg

Melo theory 31st July 2012 11:07 AM

JB weld, I had to use 4 packs of this stuff.

http://i167.photobucket.com/albums/u...lojason/10.jpg


All times are GMT. The time now is 08:34 PM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio


Content Relevant URLs by vBSEO 3.3.2