diyAudio

diyAudio (http://www.diyaudio.com/forums/)
-   Multi-Way (http://www.diyaudio.com/forums/multi-way/)
-   -   Old school 12" speaker for midbass. (http://www.diyaudio.com/forums/multi-way/215937-old-school-12-speaker-midbass.html)

olsound 10th July 2012 09:33 PM

Old school 12" speaker for midbass.
 
http://seijs22.home.xs4all.nl/olsoun...0celection.jpg

http://seijs22.home.xs4all.nl/ollie.jpg

Design by epa

djlivex 11th July 2012 01:20 AM

Niceeee! What driver? Looks like a Bertha sub? Can it be extended response to say 600Hz, maybe I can put these on top of the TH1819??? Hope Faital for the driver too! Do you have the plans? Thanks!!!

olsound 11th July 2012 09:33 AM

Quote:

Originally Posted by djlivex (Post 3088085)
Niceeee! What driver? Looks like a Bertha sub? Can it be extended response to say 600Hz, maybe I can put these on top of the TH1819??? Hope Faital for the driver too! Do you have the plans? Thanks!!!


Hi Djlivex
I don't konw if any faital driver can work in this design,may maybe. The speaker ththat this cabinet design for is a old celestion bx 12" 4085. The hornresp data will be posted later then you can try if your faital driver works in this cabinet

epa 11th July 2012 03:23 PM

here is the dayton sim
http://seijs22.home.xs4all.nl/ollie2.jpg

epa 11th July 2012 03:26 PM

the 12"kickbas wil extend to 400hz ,after that its steep downhill.

djlivex 11th July 2012 03:54 PM

Quote:

Originally Posted by olsound (Post 3088359)
Hi Djlivex
I don't konw if any faital driver can work in this design,may maybe. The speaker ththat this cabinet design for is a old celestion bx 12" 4085. The hornresp data will be posted later then you can try if your faital driver works in this cabinet

Is the plans available??? Thanks!:confused:

djlivex 11th July 2012 03:57 PM

Which Dayton driver is that it looks like it can go as high as 1kHz?:)

olsound 11th July 2012 04:00 PM

Quote:

Originally Posted by djlivex (Post 3088671)
Is the plans available??? Thanks!:confused:

The plan for the midbass is in the first post. The dayton 6" plan is not ready yet.

epa 11th July 2012 04:12 PM

http://seijs22.home.xs4all.nl/olsoun...0celection.jpg

epa 11th July 2012 04:16 PM

there are no bullit tweeters that can go as low as 2khz .
usualy 5 kz minimum.
however current 1"compression drivers like bms extend from 1.5 to 20khz,at cheaper prices then bullits.
the graph represents omni responce.
i wil post an akabak graph at 0 and 30 degrees


All times are GMT. The time now is 11:13 PM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio


Content Relevant URLs by vBSEO 3.3.2