Yes. Most excellent book. If a few more folks would read it, they could save themselves a lot of ramp-up time. It costs less than a handful of inductors to do a crossover incorrectly just once!
Here is a speaker model from Rod Elliot:
http://sound.westhost.com/cz-f4.png
It is Figure 4 at:
Loudspeaker Cable Characteristic Impedance
Also included at the link are the parameters for several different cable models, in Table 2 (and much more).
There are also some detailed speaker models in the Files section of the LT-SPICE discussion group, at yahoogroups.com .
Regards,
Tom
http://sound.westhost.com/cz-f4.png
It is Figure 4 at:
Loudspeaker Cable Characteristic Impedance
Also included at the link are the parameters for several different cable models, in Table 2 (and much more).
There are also some detailed speaker models in the Files section of the LT-SPICE discussion group, at yahoogroups.com .
Regards,
Tom
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.