Go Back   Home > Forums > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Multi-Way Conventional loudspeakers with crossovers

all CSS heavyweight compact 3way
all CSS heavyweight compact 3way
Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Thread Tools Search this Thread
Old 16th June 2012, 09:16 PM   #1
Henkjan is offline Henkjan  Netherlands
diyAudio Member
Henkjan's Avatar
Join Date: Jan 2006
Location: Berkel en Rodenrijs
Default all CSS heavyweight compact 3way

For the origins of this speaker, first a brief history lesson for the younger half of the forum

Some 20+ years ago, speakers were square boxes (with dark brown cloth in front of the drivers).
If you wanted a "proper" speaker, it had to be a 3 way. This would mean a larger square box, with an 8 or 10 inch woofer in a sealed box. This speaker will be one of those, a square box with a 10" woofer (but no cloth, sorry).

I had planned on building a 3way for some time, but finally got to building it when CSS introduced their new high end tweeter and midrange. For a decent woofer CSS is also the right place to shop; for this 3way either the Trio8 or the SDX10 would suit. I decided for the SDX10 for it would provide (as expected) a deeper more powerfull bass.

To start with the end in mind, here is a picture of the speaker as it is now:
I will write some more posts later...
  Reply With Quote
Old 16th June 2012, 11:19 PM   #2
David Gatti is offline David Gatti  Australia
diyAudio Member
David Gatti's Avatar
Join Date: Mar 2004
Location: Melbourne, Australia
Nice job Henkjan.
The test results of that tweeter look brilliant.
Creative Sound - Product Details
  Reply With Quote
Old 16th June 2012, 11:27 PM   #3
Henkjan is offline Henkjan  Netherlands
diyAudio Member
Henkjan's Avatar
Join Date: Jan 2006
Location: Berkel en Rodenrijs
Q: Henkjan, why the "heavyweight" in the thread title?
A: it has to do with the cabinet walls

Since the drivers are better than average, I wanted to put more than average effort in building the cabinet. I decided to go for a "constrained layer" apporach: a heavy damping material in between 2 wood panels. This heavy material can be the usual bitumen, but I chose Merford Isomat TS 14. On the outside I have applied 8mm MDF, the inside of the cab is 9mm baltic birch plywood. This should give a good "dead" enclosure. It also means you need a lot of glue and time to glue everything together, with the rather long drying time of the PU glue I used it took me more than a week per box. And you need a lot of clamps....:

The mid enclosure is not square, but triangular towards the rear to "catch" the backwave (with the help of the Twaron Angel Hair damping material). This is an easy way (80/20 rule: 80% of result with 20% of the effort) to do what B&W does with the Nautilus midrange.

To prepare for construction, I made a 3D model in Sketchup. This proved helpful to see if everything fitted together and where to make some adjustmenst:
3D trio css.jpg

The baffle I made of normal 25mm MDF (in retrospect plywood would have been better). The main thing here is to create sufficient breathing space for the midrange.

And then this is how it looks without the baffle on it, all 20 kg of it
trio kast open.jpg
  Reply With Quote
Old 16th June 2012, 11:35 PM   #4
KyleinCowichan is offline KyleinCowichan  Canada
diyAudio Member
KyleinCowichan's Avatar
Join Date: Dec 2010
Location: Cowichan Bay, BC
Impressive! That looks amazing. How are you going to amplify and cross those over?


Last edited by KyleinCowichan; 16th June 2012 at 11:41 PM.
  Reply With Quote
Old 16th June 2012, 11:53 PM   #5
Henkjan is offline Henkjan  Netherlands
diyAudio Member
Henkjan's Avatar
Join Date: Jan 2006
Location: Berkel en Rodenrijs
for those with a good eye for volumes, they will have noticed that the cabinet is rather small for an SDX10. That is correct, a bit below 25 lietrs remain for the woofer, what gives a q of ~0.9. To get a decent sounding bass out of this, one can apply a large capacitor in series with the woofer. This will flatten the bump in the response, and also boost somewhat the output below fb:
near field SDX10 met 400uF.png

btw: this is nothing new, KEF did this often in the 70's, and maybe even before that. but it is a good way to get a decent bass out of the smallest cabinet size for a given woofer. For drivers with a high Qts this is usually the only way, and can even get the output to below fs

btw2: for those who want a more audiophile bass, you can turn the design into a floorstander ("continue" the cabinet at the bottom), this way you can increase the volume for the woofer a lot; thus the series cap is no longer needed. maybe you'll need to tweak the mid/woof filtering a bit (there is a dB or so difference in output in the 300Hz area acc to the sim I did with 'The Edge'), but the mid/tweet filter can remain the same
  Reply With Quote
Old 17th June 2012, 12:04 AM   #6
Henkjan is offline Henkjan  Netherlands
diyAudio Member
Henkjan's Avatar
Join Date: Jan 2006
Location: Berkel en Rodenrijs
Originally Posted by KyleinCowichan View Post
Impressive! That looks amazing. How are you going to amplify and cross those over?
thanks. crossover will be passive (I'll write more on that tomorrow), so a single amp will do. but that amp will have to be able to deliver sufficient power for the SDX10's SPL into 4pi space is rather low. So biamping is a good if you have the amps available. I played the first version on a DIY gathering last month, and it was then driven by a not so heavy amp, all went fine until we played some music with serious low bass (iirc Strawinski's Firebird), the amp did not like that at all.. If you keep volumes to a level at which you'll remain good friends with your downstairs neighbours then the demands on the amp are normal of course, but if you play it like you'll want to play a good 3way a heavier amp is a good idea.

I did consider making it a semi active filter, with passive for the mid/high and active for the mid/woof (using the Hypex AS2.100 for example), but wanted to keep it passive so you woudn't need new amps for this
  Reply With Quote
Old 17th June 2012, 01:41 PM   #7
CSS/XBL is offline CSS/XBL  Canada
diyAudio Member
Join Date: Oct 2003

I'm thinking about a special bundle price on at least the drivers, perhap the crossover parts as well.

  Reply With Quote
Old 17th June 2012, 02:34 PM   #8
sreten is offline sreten  United Kingdom
Join Date: Nov 2003
Location: Brighton UK

FWIW though the SDX10 is an impressive bass driver the speaker is not
like typical speakers from 20 years ago. The reason being for a 3 way
you need a lot more sensitivity for the bass unit over the mid and treble.

Here the sensible choice might be an active x/o biamping
the bass to mid x/o with a passive mid to treble x/o.

Otherwise with a 85dB bass unit your looking at 80dB to 82dB mid/treble
sensitivity depending on how much of the baffle step is taken into account.

20 (or more) years ago a typical 10" would run up to around 1KHz,
thus including the baffle step in its range, and then x/o to a fairly
mundane sealed back midrange and tweeter of lower sensitivity.

rgds, sreten.

Generally for a 3 way you are looking at 3dB to 5dB worth of baffle
step correction, which means for an 85dB midrange the bass section
should be 88dB to 90dB into half space, a little lower if your prepared
to include minor midrange attenuation for flexibility / tuning.
  Reply With Quote
Old 17th June 2012, 04:02 PM   #9
Henkjan is offline Henkjan  Netherlands
diyAudio Member
Henkjan's Avatar
Join Date: Jan 2006
Location: Berkel en Rodenrijs
The next step was measuring the units in the actual box. Since the anticipated x-over mid/bass would be rather low, I could not do measurements in my home (gated I can measure downto ~300Hz, what would not be enough now). So I arranged that I could use the local school's gym, and did a ground plane measurement which allowed me to measure down to 50Hz:
meten in de gymzaal.jpg

And here are the results:
tweet - hoeken.png
mid - hoeken.png
woof - hoeken.png

The main challenge in the filter design will be the square baffle induced diffraction hump and sink between 1 and 2kHz that is present in both the tweeter and mid curve.
  Reply With Quote
Old 17th June 2012, 06:15 PM   #10
planet10 is offline planet10  Canada
diyAudio Moderator
planet10's Avatar
Join Date: Oct 2001
Location: Victoria, BC, NA, Sol III
all CSS heavyweight compact 3way

That is a very strange looking set-up for measuring. It's not half-plane (speaker is not on the floor (ot in the floor), and it is not "as far away as possible from the floor" which is the reason for a big room.

community sites t-linespeakers.org, frugal-horn.com, frugal-phile.com ........ commercial site planet10-HiFi
p10-hifi forum here at diyA
  Reply With Quote


all CSS heavyweight compact 3wayHide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Heavyweight Sony laser/loader mschwilson Digital Source 5 18th August 2013 07:24 PM
Desktop XL - a compact TL for the CSS EL70 Henkjan Full Range 35 10th July 2010 05:50 PM
CSS FR125S, Alpair 7 & CSS EL70? Monte Verdi Full Range 6 29th June 2010 09:51 PM
2.5 or 3way deki Multi-Way 13 18th July 2007 03:33 PM
Height issues for Dayton CSS AC 3way dunderchief Multi-Way 7 11th February 2005 08:30 PM

New To Site? Need Help?

All times are GMT. The time now is 03:48 AM.

Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 15.00%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Copyright ©1999-2017 diyAudio