diyAudio (
-   Multi-Way (
-   -   Hi Vi F6 box (

ioro 13th April 2012 10:38 PM

Hi Vi F6 box
Hi everyone, me name is Jordan. I have Swans Tempus kit with woofer F6. What box do you think is the best for this driver ? I found this but a can't see the dimensions for TL. 10x for help

ioro 14th April 2012 08:36 PM

I found this , but there are no dimensions too. Can anybody help me with the box ?
Nominal Impedance (Z)(Ω) : 8 Resonance Frequency (Fs)(Hz) : 45 Nominal Power Handling (Pnom)(W) : 45 Max Power Handling (Pmax)(W) : 90 Sensitivity (2.83v/1m)(dB) : 88 Weight (M)(Kg) : 2.1 VC Diameter (mm) : 25 DC (Re)(Ω) : 6.5 VC Length (H)(mm) : 14.5 VC Former : SV VC Frame : Kapton Magnet System : Shielded Magnet Former : Ferrite Force Factor (BL)(N/A) : 9.0 Gap Height (He)(mm) : 6.0 Linear Excursion (Xmax)(mm) : 4.3 Suspension Compliance (Cms)(uM/N) : 658 Mechanical Q (Qms) : 3.91 Electrical Q (Qes) : 0.38 Total Q (Qts) : 0.35 Moving Mass (Mms)(g) : 18.3 Effective Piston Area (Sd)(m2) : 0.0139 Equivalent Air Volume (Vas)(L) : 16.4 Cabinet Type : Vented Recommended Box Volume(Vb)(L) : 15 Tuning Frequency(Fb)(Hz) : 45 -3dB Cut-Off Frequency(F3)(Hz) : 42

sreten 15th April 2012 04:00 PM

Hi, box size ~ 900H x 230W x 310D mm, rgds, sreten.

ioro 15th April 2012 07:36 PM

Hi sreten, thank you for the post. Can you tell me more info for the box ? What is the freq at -3 and -10 dB ? My english is bad, and i'm sorry for this. Sreten please send me if you want to my email the dimensions and placement of the wood barriers inside ? Do i need batting for inside ? Regards, Jordan.

sreten 15th April 2012 09:27 PM


IPL use two basic TL cabinet designs, the one in the above post and :

Its not difficult to work out the internal dimensions given overall size.

If your driver is similar to the IPL drivers the boxes will suit as well
as they do to the IPL drivers. Its not rocket science and it is just
assuming IPL have reasonable alignments you are copying.

Stuffing you'l have to work out yourself

If you want to get into numbers look at :

An MJK tapered TL would tend to look more like this :

Noting in the above the cabinet is far more suited to one bass driver
than two, as the line area has been completely fudged to reduce size.

rgds, sreten.

All times are GMT. The time now is 09:53 PM.

Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 18.75%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Copyright ©1999-2018 diyAudio