How to drill like this?

[ARIYAHOOR]

I just want to do some drilling like this but have no idea what tools are needed and what is the method

[Andrew Eckhardt]

pocket hole jig

[nattonrice]

Google Pocket-hole joinery =)

Tools are cheap and can be found at the local hardware shop.

[KatieandDad]

Nothing special about the drill - just the engle that the drill was used at.

Simplest way is to make yourself a drill guide from a block of wood.
Start by making a small indentation with a bradol or a small screwdriver to stop the bit slipping and then gradually go up in drill sizes until you get the size that you want.


Wrap tape around the drill bit so you dont go too far.

[ARIYAHOOR]

Originally Posted by Andrew Eckhardt

pocket hole jig

thanks buddy... I found Kreg Jig

Originally Posted by KatieandDad

Nothing special about the drill - just the engle that the drill was used at.

Simplest way is to make yourself a drill guide from a block of wood.
Start by making a small indentation with a bradol or a small screwdriver to stop the bit slipping and then gradually go up in drill sizes until you get the size that you want.


Wrap tape around the drill bit so you dont go too far.

yeah you're right ... I can manage to build a drill guide with still and use it... any diy guide to build something like this?

[Andrewbee]

Yes there are diy versions, trust me, dont bother with them. I am familiar with both the General and Kreg pocket hole jigs, just buy the Kreg and be done.