I just want to do some drilling like this but have no idea what tools are needed and what is the method
An externally hosted image should be here but it was not working when we last tested it.
Nothing special about the drill - just the engle that the drill was used at.
Simplest way is to make yourself a drill guide from a block of wood.
Start by making a small indentation with a bradol or a small screwdriver to stop the bit slipping and then gradually go up in drill sizes until you get the size that you want.
Wrap tape around the drill bit so you dont go too far.
Simplest way is to make yourself a drill guide from a block of wood.
Start by making a small indentation with a bradol or a small screwdriver to stop the bit slipping and then gradually go up in drill sizes until you get the size that you want.
Wrap tape around the drill bit so you dont go too far.
thanks buddy... I found Kreg Jigpocket hole jig
Nothing special about the drill - just the engle that the drill was used at.
Simplest way is to make yourself a drill guide from a block of wood.
Start by making a small indentation with a bradol or a small screwdriver to stop the bit slipping and then gradually go up in drill sizes until you get the size that you want.
Wrap tape around the drill bit so you dont go too far.
yeah you're right ... I can manage to build a drill guide with still and use it... any diy guide to build something like this?
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.