another random attempt for more bass

klampykixx · 9th January 2012, 07:04 AM

hi guys, please excuse my "paint" pic, but knowing that it will be 6inch drivers being used, will a small tapped horn like this end up boomy or just lack low bass? or end up sound ok-ish?

looking for something with a bit of authority in the bass region as they currently have zero bass and just flop about in there backless enclosures.

any suggestions will be greatly appreciated. but as per usual, budget is next to none. speakers in question are these>

currently sitting like this

thanks.

mdocod · 9th January 2012, 08:04 AM

Hello klampykixx,

Without T/S perimeters of the drivers, it's going to be very hard to make a call on the effects of box changes.

Eric

klampykixx · 9th January 2012, 09:54 AM

i was hoping one of the people on here might know the drivers and know the T/s as i cant find them.

madtecchy · 9th January 2012, 10:34 AM

Is that driver designed for automotive use.. If so it might be a good idea to post in the car audio section asking if anyone knows the Ts params.

Best of luck Ian

klampykixx · 9th January 2012, 10:36 AM

ok thanks

didnt think of that...

9th January 2012, 07:04 AM	#1
klampykixx diyAudio Member Join Date: Dec 2010 Location: NSW	another random attempt for more bass hi guys, please excuse my "paint" pic, but knowing that it will be 6inch drivers being used, will a small tapped horn like this end up boomy or just lack low bass? or end up sound ok-ish? looking for something with a bit of authority in the bass region as they currently have zero bass and just flop about in there backless enclosures. any suggestions will be greatly appreciated. but as per usual, budget is next to none. speakers in question are these> currently sitting like this thanks.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Random attempt to improve power supply	zigzagflux	Power Supplies	9	7th April 2011 11:40 AM
Random electrocution?	bob_v5	Everything Else	20	8th February 2008 04:06 PM
Random horn questions	e-side	Multi-Way	5	20th July 2006 10:48 PM
Random Popping	ShinOBIWAN	Solid State	5	2nd May 2005 04:21 PM
Is distortion random ?	Bernhard	Solid State	46	30th December 2003 01:59 AM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

9th January 2012, 08:04 AM	#2
mdocod diyAudio Member Join Date: Dec 2011 Location: Black Forest, CO	Hello klampykixx, Without T/S perimeters of the drivers, it's going to be very hard to make a call on the effects of box changes. Eric

9th January 2012, 09:54 AM	#3
klampykixx diyAudio Member Join Date: Dec 2010 Location: NSW	i was hoping one of the people on here might know the drivers and know the T/s as i cant find them.

9th January 2012, 10:34 AM	#4
madtecchy diyAudio Member Join Date: Dec 2010 Location: wigan	Is that driver designed for automotive use.. If so it might be a good idea to post in the car audio section asking if anyone knows the Ts params. Best of luck Ian

9th January 2012, 10:36 AM	#5
klampykixx diyAudio Member Join Date: Dec 2010 Location: NSW	ok thanks didnt think of that...

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)