When you use a driver in a horn, using a front horn as the example as this is the standard method, you place the rear of the driver into a box which you use to balance it against the pressure caused by the horn. Drivers for a back loaded horn need to be chosen carefully as you don't have this option.
This process is often referred to as 'reactance annulling' if you wanted to read up on it.
This process is often referred to as 'reactance annulling' if you wanted to read up on it.
See Rog Mogale's Design (example)
Speakerplans.com
Use the PD1850 for best results.
Precision Devices International Limited
Regards,
WHG
Speakerplans.com
Use the PD1850 for best results.
Precision Devices International Limited
Regards,
WHG
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.