Zobel networks for tri-amp system?

[nonsuchpro]

Hey all.
I recently built a pair of 3-way speakers that I've tri-amped. The crossover is outboard. I like how they've came out but would it behoove me to put a Zobel network on each driver on the way out?

Thanks!

[sreten]

Hi, No. It should not make any difference, rgds, sreten.

[mdocod]

Impedance correction would effect the load presented to the amplifier, not the active crossover. Sorry

[AllenB]

While I agree with the above posts, if your amplifiers prefer a less reactive load or if you are using an amp without a low output impedance then you might have a specific reason to use them.

[sreten]

Hi,

The no is to is he "behooved" to do it, your not as a matter of course.

rgds, sreten.

[Michael Chua]

I'm running this active 3-way now. No Zobel. Amps straight to drivers. It's actually a 4-way. An active 12" subwoofer is not shown.

[nonsuchpro]

Originally Posted by Michael Chua

I'm running this active 3-way now. No Zobel. Amps straight to drivers. It's actually a 4-way. An active 12" subwoofer is not shown.

Nice build. Here's mine :

[Michael Chua]

Thanks. Nice speakers you have too.

What are the drivers in the first picture.

[nonsuchpro]

Originally Posted by Michael Chua

Thanks. Nice speakers you have too.

What are the drivers in the first picture.

Dayton PT2 Plannar tweeter, Morel 55 mid and a Dayton DA270 woofer.
I'm gonna swap the woofers out when I get some dough.