hi all
i am trying to design passive xover for peerless India SR10DT tweeter. i have attached FR and imp curves. i am sorry for extremely bad diagram quality but all i got from the seller is this hand scanned datasheet!
below are the specs that i could get from the datasheet,
Z=8 ohms
Fs-1800Hz
sensitivity=92dB
P(nominal)=60W
Re=6.4 ohms
Cms=0.03 m/N
Mms=0.27g
Qms=2.4
Qes=1.99
Qts=1.09
Sd=6 sq.cm
Bl=3.24 N/A
the impedance response looks bit odd to me and dont understanding how to design xover for this.
i am trying to design passive xover for peerless India SR10DT tweeter. i have attached FR and imp curves. i am sorry for extremely bad diagram quality but all i got from the seller is this hand scanned datasheet!
below are the specs that i could get from the datasheet,
Z=8 ohms
Fs-1800Hz
sensitivity=92dB
P(nominal)=60W
Re=6.4 ohms
Cms=0.03 m/N
Mms=0.27g
Qms=2.4
Qes=1.99
Qts=1.09
Sd=6 sq.cm
Bl=3.24 N/A
the impedance response looks bit odd to me and dont understanding how to design xover for this.
