8" woofers of a specific size

[bbggg]

This may sound silly, but I was given, through a friend of a friend, a pair of empty speaker shells, no drivers, no crossover. They must have been a classic 8inch/1inch two/way affair of the 80's. They are about 15 inches tall. The veneer is in pretty darn good condition considering except for the back that's just painted black. The label must have been on the screen and the screen's missing, all that's left is the velcro strips for it. I think I should make something out of them.
They carry four woofer fixing points on a diameter of 222 mm, and the four are equidistant i.e. set at 90 degree angles to each other. The fixing points are t-nuts embedded in the wood, so pretty nice too. Out of the tops of y'alls heads, folks, any 8 inch woofer with a four screw, 222 mm bolt circle? I took a look at Scan, SEAS, and Tymphany; most were six screw fixers and the four screw fixers were all several crucial mm too small.

[Michael Bean]

You can always fill the old holes and make new ones if necessary.

Mike

[Moondog55]

Photos please
Filling in the old holes with wood filler and drilling new ones is easy enough, just but get new T-nuts if you can'the old ones removed