4" for Mini Monitor - Page 3

frank1 · 09:42 AM

Quote:

Originally Posted by inrank

Can anybody recommend any 4" mid bass drivers for a Mini Monitor designed for a small 8ft square room (Needs to be a sealed enclosure)
And more about tight, punchy bass and not depth.

Cheers, Rob

Checkout the Hivi B4n:
Product information:B4N bass-midrange
I just built a HT setup using these in sealed boxes... Very good but best ported for use without a sub.

Frank

inrank · 4th August 2011, 09:53 AM

I am having trouble getting ZMA and FRD files from the wavecor site.
Database
I save them as either ZMA or FRD, delete the text coloum headings and it does not load.

inrank · 10:56 AM

Edit, sorted now. Got the ZMA and FRD files for the Wavecor WF120BD04 and the D2905/9300 and having a play with Loudspeaker Design Software

Anyone got the FRD/ZMA files for the CA12RCY or SB12NRXF25-4?

inrank · 4th August 2011, 11:57 AM

Been having a play- (Both 2nd order parallel and inverted polarity on the tweeters)

Wavecor WF120BD04/Scanspeak D2010

Wavecor WF120BD04/hiquphon OW1

No BSC atm as they will be placed close to the rear walls, i dont think they will need it!

inrank · 4th August 2011, 01:08 PM

I am having problems with these ZMA/FRD files that i made from the Wavecor site for the WF120BD04.

It does not load them, above it did when i selected the files above....

5th element · 4th August 2011, 01:30 PM

Being sealed or ported does not matter really from a crossover design point. If you see a design you like that's ported, then simply make it sealed. Keep the cabinet height and width the same and you're good to go.

http://www.humblehomemadehifi.com/do...Mk-II_copy.pdf

http://www.humblehomemadehifi.com/do...0HATT_copy.pdf

inrank · 11th August 2011, 03:06 PM

Finally got some data FRD/ZMA from Seas on the CA12CY, seems to go well with the ScanSpeak D2010 tweeter!

jerome69 · 11th August 2011, 04:26 PM

If you are looking for a box ? 30£ or 50€
Eltax - Concept Mini

inrank · 11th August 2011, 04:44 PM

Cheers, would probably just make my own anyway though.
Currently weighing up this diy project vs just buying a pair of SCM7's. In total with the CA12RCY or Wavecor and D2010 or D2905 or HDS tweeters etc and box, crossover components, gets very close to the £300 i could spend on a used pair of ATC's.

jerome69 · 11th August 2011, 04:54 PM

Good point, sometimes it is useless to DIY.
500£ for a new SCM7.

4th August 2011, 10:49 AM	#23
inrank diyAudio Member Join Date: Oct 2005	Edit, sorted now. Got the ZMA and FRD files for the Wavecor WF120BD04 and the D2905/9300 and having a play with Loudspeaker Design Software Anyone got the FRD/ZMA files for the CA12RCY or SB12NRXF25-4? Last edited by inrank; 4th August 2011 at 10:56 AM.

4th August 2011, 01:30 PM	#26
5th element diyAudio Member Join Date: Oct 2002 Location: England	Being sealed or ported does not matter really from a crossover design point. If you see a design you like that's ported, then simply make it sealed. Keep the cabinet height and width the same and you're good to go. http://www.humblehomemadehifi.com/do...Mk-II_copy.pdf http://www.humblehomemadehifi.com/do...0HATT_copy.pdf __________________ What the hell are you screamin' for? Every five minutes there's a bomb or somethin'! I'm leavin! bzzzz! Droggon Attack!

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Accuton Mini Monitor	stvnharr	Multi-Way	1	28th March 2009 10:04 AM
Griffin's Jordan JK92S/AC G2si/G2i Mini Monitor "array"	neil_kaye	Multi-Way	2	30th November 2006 02:46 AM
The A4 monitor, best mini monitor?	KURT	Multi-Way	5	26th April 2005 01:34 PM
Mini-Monitor Project Going On	gary f	Multi-Way	29	20th March 2004 03:45 AM
best midbass for a horn "mini" monitor?	E. Billeci	Multi-Way	2	13th January 2004 06:46 PM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

4th August 2011, 09:53 AM	#22
inrank diyAudio Member Join Date: Oct 2005	I am having trouble getting ZMA and FRD files from the wavecor site. Database I save them as either ZMA or FRD, delete the text coloum headings and it does not load.

4th August 2011, 11:57 AM	#24
inrank diyAudio Member Join Date: Oct 2005	Been having a play- (Both 2nd order parallel and inverted polarity on the tweeters) Wavecor WF120BD04/Scanspeak D2010 Wavecor WF120BD04/hiquphon OW1 No BSC atm as they will be placed close to the rear walls, i dont think they will need it!

11th August 2011, 03:06 PM	#27
inrank diyAudio Member Join Date: Oct 2005	Finally got some data FRD/ZMA from Seas on the CA12CY, seems to go well with the ScanSpeak D2010 tweeter!

11th August 2011, 04:26 PM	#28
jerome69 diyAudio Member Join Date: Feb 2008 Location: Lyon	If you are looking for a box ? 30£ or 50€ Eltax - Concept Mini

11th August 2011, 04:44 PM	#29
inrank diyAudio Member Join Date: Oct 2005	Cheers, would probably just make my own anyway though. Currently weighing up this diy project vs just buying a pair of SCM7's. In total with the CA12RCY or Wavecor and D2010 or D2905 or HDS tweeters etc and box, crossover components, gets very close to the £300 i could spend on a used pair of ATC's.

11th August 2011, 04:54 PM	#30
jerome69 diyAudio Member Join Date: Feb 2008 Location: Lyon	Good point, sometimes it is useless to DIY. 500£ for a new SCM7.