Go Back   Home > Forums > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Multi-Way Conventional loudspeakers with crossovers

Crossover or not.......
Crossover or not.......
Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 21st June 2011, 04:15 AM   #1
503Timber is offline 503Timber  United States
diyAudio Member
 
Join Date: May 2011
Location: Portland Oregon
Default Crossover or not.......

I have a few drivers hanging around and would like to build some speakers. The first is a Motorola KSN1005 like this one CTS / Motorola KSN-1005 Flush Mount Piezo Electric Super Horn Tweeter</font>

The other is a Pioneer B20FU20-54F like this one Pioneer B20FU20-54F 8" Heavy Duty Woofer

The woofers came out a of a cabinet that ran them full range (with a piezo wired to them).....the piezos were in another cabinet wired from it's woofer with no crossover or anything. I want to build a sealed cabinet for the woofer and the piezo mounted OB on top. I think the woofers would be better with some sort of network would they not? I have also read many opinions on what to do with these tweeters (L-pad, 50ohm 3W resistor, sometimes nothing)......any ideas there?

I have tried to use software and calculators to come up with something but they need to dumb those things down for this guy to use them
  Reply With Quote
Old 21st June 2011, 04:51 AM   #2
bassnkeys is offline bassnkeys  United States
diyAudio Member
 
Join Date: Feb 2011
Location: MN
Piezo tweeters have high impedance... often a 5-10 ohm resister is put in line with them to protect them, other than that they are so resistive of low frequency that they do not need a cap to protect or roll them off. Try letting both the drivers run full range with no crossover and let your ears guide you. You may be able to get away with nothing or maybe a coil to take the woofer out after 2k or so. Remember that a coil on the woofer is going to act at 6db per octave so even if you use a .64 coil with an 8 ohm driver the charts will give you a crossover point of 2khz... there will still be a fair amount of output an octave above i.e. 4khz. I your tweeter is just getting started around 2.5khz you may have a good match.
  Reply With Quote

Reply


Crossover or not.......Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Crossover for vifa 2 way setup - how can I find out what this crossover is doing? Tino Multi-Way 11 17th May 2009 04:21 AM
Crossover Help xecluded Multi-Way 7 18th October 2008 10:18 AM
Passive crossover into active crossover hahfran Multi-Way 16 10th February 2008 06:16 PM
Sub crossover help Nathan1k9 Subwoofers 22 14th January 2007 08:57 PM
Can you hear the crossover point of a speaker with a well-designed crossover? 454Casull Multi-Way 11 2nd April 2004 05:48 AM


New To Site? Need Help?

All times are GMT. The time now is 09:58 PM.


Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 15.79%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Copyright ©1999-2017 diyAudio
Wiki