Seas Prestige Idunn Speaker Kit help needed

nick650 · 02:19 AM

Never heard of Seas and was wondering if they will give me a great improvement over my elemental design a4MTM (mids lacked) and have the clarity like the B and W 601 (they lacked midrange punch but quality was amazing).

Setup: PC-Digital-Onkyo HT-RC260-a4MTM-Elemental Design A2-300

Crossover network I was going to build my own and have NO idea if I choose good parts but I can assemble it.

Inductor: Goertz (14 awg) Copper foil .39mH $21.10

Inductor: Goertz (14 awg) Copper foil 2.2mH $45.65

Capacitor: Mundorf 15 mfd Supreme caps $75.95

Capacitor: ClarityCap 10.0 mfd ESA $29.50

Capacitor: Mundorf 2.7 mfd Supreme caps $29.10

Resistor: 10.0 ohm Mundorf M-Resist $13.30

Resistor: 1.0 ohm Mundorf Metal Oxide Film $2.50

Thank you!

stoc005 · 1st April 2011, 02:16 AM

I like SEAS a lot. Tweeters and mids are very good. Woofers.....if you find the right one for your design, go for it. You could do far worse than Seas. Audiophile crossover parts are better as well.

nick650 · 1st April 2011, 02:32 AM

https://www.madisound.com/store/prod...oducts_id=8806

Kit I was going to use but decided to buy everything individually and the woofers and tweeters will be the same and they are:

Woofer: https://www.madisound.com/store/prod...oducts_id=8766

Tweet: https://www.madisound.com/store/prod...oducts_id=8322

nick650 · 1st April 2011, 06:18 PM

Eton Symphony 7 or seas Idunn?

1st April 2011, 01:57 AM	#1
nick650 diyAudio Member Join Date: Apr 2011	Seas Prestige Idunn Speaker Kit help needed Never heard of Seas and was wondering if they will give me a great improvement over my elemental design a4MTM (mids lacked) and have the clarity like the B and W 601 (they lacked midrange punch but quality was amazing). Setup: PC-Digital-Onkyo HT-RC260-a4MTM-Elemental Design A2-300 Crossover network I was going to build my own and have NO idea if I choose good parts but I can assemble it. Inductor: Goertz (14 awg) Copper foil .39mH $21.10 Inductor: Goertz (14 awg) Copper foil 2.2mH $45.65 Capacitor: Mundorf 15 mfd Supreme caps $75.95 Capacitor: ClarityCap 10.0 mfd ESA $29.50 Capacitor: Mundorf 2.7 mfd Supreme caps $29.10 Resistor: 10.0 ohm Mundorf M-Resist $13.30 Resistor: 1.0 ohm Mundorf Metal Oxide Film $2.50 Thank you! Last edited by nick650; 1st April 2011 at 02:19 AM.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Seas Idunn kit	DIFORCE	Multi-Way	10	14th May 2012 08:58 PM
Seas Idunn Kit - Photos galore	hasaudio.co.nz	Multi-Way	5	20th August 2011 10:44 PM
SEAS Prestige L26RFX/P as a sub?	Face	Subwoofers	8	10th March 2011 03:56 PM
SEAS Prestige 2.5 way	Boris_valkov	Multi-Way	4	6th February 2011 05:27 AM
SPECIAL!!!! Seas Idunn Kit	hasaudio.co.nz	Vendor's Bazaar	4	25th April 2010 11:36 PM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

1st April 2011, 02:16 AM	#2
stoc005 diyAudio Member Join Date: Feb 2007 Location: Midwest in the USA	I like SEAS a lot. Tweeters and mids are very good. Woofers.....if you find the right one for your design, go for it. You could do far worse than Seas. Audiophile crossover parts are better as well.

1st April 2011, 02:32 AM	#3
nick650 diyAudio Member Join Date: Apr 2011	https://www.madisound.com/store/prod...oducts_id=8806 Kit I was going to use but decided to buy everything individually and the woofers and tweeters will be the same and they are: Woofer: https://www.madisound.com/store/prod...oducts_id=8766 Tweet: https://www.madisound.com/store/prod...oducts_id=8322

1st April 2011, 06:18 PM	#4
nick650 diyAudio Member Join Date: Apr 2011	Eton Symphony 7 or seas Idunn?

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)